Image::Xpm(3pm) - phpMan

Command: man perldoc info search(apropos)  


Xpm(3pm)                       User Contributed Perl Documentation                       Xpm(3pm)

NAME
       Image::Xpm - Load, create, manipulate and save xpm image files.

SYNOPSIS
           use Image::Xpm;

           my $j = Image::Xpm->new(-file, 'Camel.xpm');

           my $i = Image::Xpm->new(-width => 10, -height => 16);

           my $h = $i->new; # Copy of $i

           $i->xy(5, 8, 'red');       # Set a colour (& add to palette if necessary)
           print $i->xy(9, 3);        # Get a colour

           $i->xy(120, 130, '#1256DD');
           $i->xy(120, 130, $i->rgb2colour(66, 0x4D, 31));

           $i->vec(24, '#808080');    # Set a colour using a vector offset
           print $i->vec(24);         # Get a colour using a vector offset

           print $i->get(-width);     # Get and set object attributes
           $i->set(-height, 15);

           $i->load('test.xpm');
           $i->save;

           # Changing just the palette
           $i->add_colours(qw(red green blue #123456 #C0C0C0));
           $i->del_colour('blue');

DESCRIPTION
       This class module provides basic load, manipulate and save functionality for the xpm file
       format. It inherits from "Image::Base" which provides additional manipulation
       functionality, e.g. "new_from_image()". See the "Image::Base" pod for information on
       adding your own functionality to all the Image::Base derived classes.

   new()
           my $i = Image::Xpm->new(-file => 'test.xpm');
           my $j = Image::Xpm->new(-width => 12, -height => 18);
           my $k = $i->new;

       We can create a new xpm image by reading in a file, or by creating an image from scratch
       (all the pixels are white by default), or by copying an image object that we created
       earlier.

       If we set "-file" then all the other arguments are ignored (since they're taken from the
       file). If we don't specify a file, "-width" and "-height" are mandatory and "-cpp" will
       default to 1 unless specified otherwise.

       "-file"
           The name of the file to read when creating the image. May contain a full path.  This
           is also the default name used for "load"ing and "save"ing, though it can be overridden
           when you load or save.

       "-width"
           The width of the image; taken from the file or set when the object is created; read-
           only.

       "-height"
           The height of the image; taken from the file or set when the object is created; read-
           only.

       "-cpp"
           Characters per pixel. Commonly 1 or 2, default is 1 for images created by the module;
           read-only.

           See the example for how to change an image's cpp.

       "-hotx"
           The x-coord of the image's hotspot; taken from the file or set when the object is
           created. Set to -1 if there is no hotspot.

       "-hoty"
           The y-coord of the image's hotspot; taken from the file or set when the object is
           created. Set to -1 if there is no hotspot.

       "-ncolours"
           The number of unique colours in the palette. The image may not be using all of them;
           read-only.

       "-cindex"
           An hash whose keys are colour names, e.g. '#123456' or 'blue' and whose values are the
           palette names, e.g. ' ', '#', etc; read-only. If you want to add more colours to the
           image itself simply write pixels with the new colours using "xy"; if you want to add
           more colours to the palette without necessarily using them in the image use
           "add_colours".

       "-palette"
           A hash whose keys are the palette names, e.g. ' ', '#', etc. and whose values are
           hashes of colour type x colour name pairs, e.g. "c => red", etc; read-only. If you
           want to add more colours to the image itself simply write pixels with the new colours
           using "xy"; if you want to add more colours to the palette without necessarily using
           them in the image use "add_colours".

       "-pixels"
           A string of palette names which constitutes the data for the image itself; read-only.

       "-extname"
           The name of the extension text if any; commonly XPMEXT; read-only.

       "-extlines"
           The lines of text of any extensions; read-only.

       "-comments"
           An array (possibly empty) of comment lines that were in a file that was read in; they
           will be written out although we make no guarantee regarding their placement; read-
           only.

   get()
           my $width = $i->get(-width);
           my ($hotx, $hoty) = $i->get(-hotx, -hoty);

       Get any of the object's attributes. Multiple attributes may be requested in a single call.

       See "xy" and "vec" to get/set colours of the image itself.

   set()
           $i->set(-hotx => 120, -hoty => 32);

       Set any of the object's attributes. Multiple attributes may be set in a single call; some
       attributes are read-only.

       See "xy" and "vec" to get/set colours of the image itself.

   xy()
           $i->xy(4, 11, '#123454');    # Set the colour at point 4,11
           my $v = $i->xy(9, 17);       # Get the colour at point 9,17

       Get/set colours using x, y coordinates; coordinates start at 0. If the colour does not
       exist in the palette it will be added automatically.

       When called to set the colour the value returned is characters used for that colour in the
       palette; when called to get the colour the value returned is the colour name, e.g. 'blue'
       or '#f0f0f0', etc, e.g.

           $colour = xy($x, $y);            # e.g. #123456
           $cc     = xy($x, $y, $colour);   # e.g. !

       We don't normally pick up the return value when setting the colour.

   vec()
           $i->vec(43, 0);      # Unset the bit at offset 43
           my $v = $i->vec(87); # Get the bit at offset 87

       Get/set bits using vector offsets; offsets start at 0. The offset of a pixel is ((y *
       width * cpp) + (x * cpp)).

       The sort of return value depends on whether we are reading (getting) or writing (setting)
       the colour - see "xy" for an explanation.

   rgb2colour() and rgb2color()
           $i->rgb2colour(0xff, 0x40, 0x80);    # Returns #ff4080
           Image::Xpm->rgb2colour(10, 20, 30);  # Returns #0a141e

       Convenience class or object methods which accept three integers and return a colour name
       string.

   load()
           $i->load;
           $i->load('test.xpm');

       Load the image whose name is given, or if none is given load the image whose name is in
       the "-file" attribute.

   save()
           $i->save;
           $i->save('test.xpm');

       Save the image using the name given, or if none is given save the image using the name in
       the "-file" attribute. The image is saved in xpm format.

   add_colours() and add_colors()
           $i->add_colours(qw(#C0C0DD red blue #123456));

       These are for adding colours to the palette; you don't need to use them to set a pixel's
       colour - use "xy" for that.

       Add one or more colour names either as hex strings or as literal colour names.  These are
       always added as type 'c' colours; duplicates are ignored.

       NB If you just want to set some pixels in colours that may not be in the palette, simply
       do so using "xy" since new colours are added automatically.

   del_colour() and del_color()
           $i->del_colour('green');

       Delete a colour from the palette; returns undef if the colour isn't in the palette, false
       (0) if the colour is in the palette but also in the image, or true (1) if the colour has
       been deleted (i.e. it was in the palette but not in use in the image).

EXAMPLE
   Changing the -cpp of an image:
           my $i = Image::Xpm(-file => 'test1.xpm'); # test1.xpm has cpp == 1
           my $j = $i->new_from_image('Image::xpm', -cpp => 2);
           $j->save('test2.xpm');

           # Could have written 2nd line above as:
           my $j = $i->new_from_image(ref $i, -cpp => 2);

CHANGES
       2000/11/09

       Added Jerrad Pierce's patch to allow load() to accept filehandles or strings; will
       document in next release.

       2000/10/19

       Fixed bugs in xy() and vec() reported by Pat Gunn.

       2000/05/25

       Fixed a bug in the test file; fixed a bug in save() which affected xpm extensions.

       2000/05/04

       Fixed bugs in xy(), vec(), save() and load().  Improved the test program.

       2000/05/03

       Created.

AUTHOR
       Mark Summerfield. I can be contacted as <summer AT perlpress.com> - please include the word
       'xpm' in the subject line.

COPYRIGHT
       Copyright (c) Mark Summerfield 2000. All Rights Reserved.

       This module may be used/distributed/modified under the GPL.

perl v5.32.1                                2021-12-15                                   Xpm(3pm)

Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-12 16:50 @3.145.32.95 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
Valid XHTML 1.0!Valid CSS!