On Apache
Under GNU General Public License
2024-12-12 16:33 @3.21.159.215 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
FREEIPMI_INTERPRET_SENSOR(5) Configuration FREEIPMI_INTERPRET_SENSOR(5)
NAME
freeipmi_interpret_sensor.conf - specify sensor interpretation rules
DESCRIPTION
The /etc/freeipmi//freeipmi_interpret_sensor.conf defines how IPMI sensors should be in-
terpreted. IPMI based sensors specify a number of states/thresholds when they are read.
Based on those states/thresholds, libraries and tools such as libfreeipmi(3), libipmimoni-
toring(3) and ipmi-sensors(8) can report if a sensor reading is "good" or "bad" via a re-
port of a NOMINAL, WARNING, or CRITICAL state.
Each of the states listed below are (hopefully) descriptive enough to describe the state
conditions that may be set/unset for each sensor type. For more detailed information on
each of the individual states listed below, please see the IPMI Specification "Sensor and
Event Code Tables". Ipmi-sensors(8) can be used to determine the sensor types and the
states/thresholds that exist on a system by outputting very verbose output and seeing what
types of Assertion or Deassertion events are possible.
The possible values for all states/thresholds below are:
Nominal - Signal Nominal reading if state/threshold tripped
Warning - Signal Warning reading if state/treshold tripped
Critical - Signal Critical reading if state/threshold tripped
Not all IPMI sensor types and event types are currently supported. If you would like more
to be supported, please e-mail the FreeIPMI mailing list.
The default values selected for individual states/thresholds being tripped are based on
best guesses and motherboards being analyzed. If you think they should be changed, please
e-mail the FreeIPMI mailing list to discuss what the defaults should be.
Most default interpretations can be determined quite easily and can meet the needs of most
users. For example, a reading of "Performance_Met" is normally better than "Perfor-
mance_Lags". However, some sensors can be ambiguous and depend completely on the manufac-
turer. For example, "State_Asserted" vs. "State_Deasserted" are completely at the inter-
pretation of the vendor. Users are advised to adjust the interpretations below as needed
for their machines.
Every group of state conditions below includes a configuration for "No_Event". This is the
condition under which no sensor states/events have occurred or are triggered. Under most
conditions, a mapping to "Nominal" is preferred. However, under some circumstances, it may
be useful to report something else. For example, if a sensor on a particular motherboard
is required to report a state/event, a no sensor state condition could indicate a broken a
sensor. This is highly dependent on the motherboard.
FORMAT
The configuration options that can be specified in the configuration file are listed be-
low. Each configuration option must be listed on a separate line. Arguments for an option
are separated by any amount of whitespace. Multiple arguments are also separated by white-
space. Comments can be marked by using the pound sign ("#") character, and lines can be
continued on the next using backslash ("\").
OPTIONS
IPMI_Threshold_Sensor
The following states correspond to threshold sensors. This normally applies to sen-
sors that measure non-discrete values, such as temperatures, voltages, RPM, etc.
IPMI_Threshold_Sensor_No_Event
Defaults to Nominal.
IPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Critical_Threshold
Defaults to Nominal.
IPMI_Threshold_Sensor_At_Or_Below_Lower_Critical_Threshold
Defaults to Critical.
IPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Recoverable_Threshold
Defaults to Critical.
IPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Critical_Threshold
Defaults to Nominal.
IPMI_Threshold_Sensor_At_Or_Above_Upper_Critical_Threshold
Defaults to Critical.
IPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Recoverable_Threshold
Defaults to Critical.
IPMI_Temperature_State
The following states correspond to Temperature sensors that report an assertion or
deassertion.
IPMI_Temperature_State_No_Event
Defaults to Nominal.
IPMI_Temperature_State_Deasserted
Defaults to Nominal.
IPMI_Temperature_State_Asserted
Defaults to Warning.
IPMI_Temperature_Limit
The following states correspond to Temperature sensors that report on limits.
IPMI_Temperature_Limit_No_Event
Defaults to Nominal.
IPMI_Temperature_Limit_Not_Exceeded
Defaults to Nominal.
IPMI_Temperature_Limit_Exceeded
Defaults to Critical.
IPMI_Temperature_Transition_Severity
The following states correspond to Temperature sensors that report on device sever-
ity.
IPMI_Temperature_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Temperature_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Temperature_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Temperature_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Voltage_State
The following states correspond to Voltage sensors that report an assertion or de-
assertion.
IPMI_Voltage_State_No_Event
Defaults to Nominal.
IPMI_Voltage_State_Deasserted
Defaults to Nominal.
IPMI_Voltage_State_Asserted
Defaults to Warning.
IPMI_Voltage_Limit
The following states correspond to Voltage sensors that report on limits.
IPMI_Voltage_Limit_No_Event
Defaults to Nominal.
IPMI_Voltage_Limit_Not_Exceeded
Defaults to Nominal.
IPMI_Voltage_Limit_Exceeded
Defaults to Critical.
IPMI_Voltage_Performance
The following states correspond to Voltage sensors that report on performance.
IPMI_Voltage_Performance_No_Event
Defaults to Nominal.
IPMI_Voltage_Performance_Met
Defaults to Nominal.
IPMI_Voltage_Performance_Lags
Defaults to Critical.
IPMI_Voltage_Transition_Severity
The following states correspond to Voltage sensors that report on device severity.
IPMI_Voltage_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Voltage_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Voltage_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Voltage_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Current_Transition_Severity
The following states correspond to Current sensors that report on device severity.
IPMI_Current_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Current_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Current_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Current_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Current_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Current_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Fan_State
The following states correspond to Fan sensors that report an assertion or deasser-
tion.
IPMI_Fan_State_No_Event
Defaults to Nominal.
IPMI_Fan_State_Deasserted
Defaults to Nominal.
IPMI_Fan_State_Asserted
Defaults to Warning.
IPMI_Fan_Transition_Severity
The following states correspond to Fan sensors that report on device severity.
IPMI_Fan_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Fan_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Fan_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Fan_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Fan_Device_Present
The following states correspond to Fan sensors that report on device installation.
IPMI_Fan_Device_Present_Device_No_Event
Defaults to Nominal.
IPMI_Fan_Device_Present_Device_Removed_Device_Absent
Defaults to Critical.
IPMI_Fan_Device_Present_Device_Inserted_Device_Present
Defaults to Nominal.
IPMI_Power_Supply_Transition_Severity
The following states correspond to Power Supply sensors that report on device
severity.
IPMI_Power_Supply_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Power_Supply_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Se-
vere
Defaults to Critical.
IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Power_Supply_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Power_Supply_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Fan_Transition_Availability
The following states correspond to Fan sensors that report on device availability.
IPMI_Fan_Transition_Availability_No_Event
Defaults to Nominal.
IPMI_Fan_Transition_Availability_To_Running
Defaults to Nominal.
IPMI_Fan_Transition_Availability_To_In_Test
Defaults to Warning.
IPMI_Fan_Transition_Availability_To_Power_Off
Defaults to Warning.
IPMI_Fan_Transition_Availability_To_On_Line
Defaults to Warning.
IPMI_Fan_Transition_Availability_To_Off_Line
Defaults to Warning.
IPMI_Fan_Transition_Availability_To_Off_Duty
Defaults to Warning.
IPMI_Fan_Transition_Availability_To_Degraded
Defaults to Critical.
IPMI_Fan_Transition_Availability_To_Power_Save
Defaults to Warning.
IPMI_Fan_Transition_Availability_Install_Error
Defaults to Critical.
IPMI_Fan_Redundancy
The following states correspond to Fan sensors that report on redundancy.
IPMI_Fan_Redundancy_No_Event
Defaults to Nominal.
IPMI_Fan_Redundancy_Fully_Redundant
Defaults to Nominal.
IPMI_Fan_Redundancy_Redundancy_Lost
Defaults to Critical.
IPMI_Fan_Redundancy_Redundancy_Degraded
Defaults to Warning.
IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
Defaults to Critical.
IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
Defaults to Critical.
IPMI_Fan_Redundancy_Non_Redundant_Insufficient_Resources
Defaults to Critical.
IPMI_Fan_Redundancy_Redundancy_Degraded_From_Fully_Redundant
Defaults to Warning.
IPMI_Fan_Redundancy_Redundancy_Degraded_From_Non_Redundant
Defaults to Warning.
IPMI_Physical_Security
The following states correspond to Physical Security sensors w/ Physical Security
specific output states.
IPMI_Physical_Security_No_Event
Defaults to Nominal.
IPMI_Physical_Security_General_Chassis_Intrusion
Defaults to Critical.
IPMI_Physical_Security_Drive_Bay_Intrusion
Defaults to Critical.
IPMI_Physical_Security_IO_Card_Intrusion
Defaults to Critical.
IPMI_Physical_Security_Processor_Area_Intrusion
Defaults to Critical.
IPMI_Physical_Security_LAN_Leash_Lost
Defaults to Critical.
IPMI_Physical_Security_Unauthorized_Dock_Undock
Defaults to Critical.
IPMI_Physical_Security_FAN_Area_Intrusion
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt
The following states correspond to Platform Violation Attempt sensors w/ Platform
Security Violation Attempt specific output states.
IPMI_Platform_Security_Violation_Attempt_No_Event
Defaults to Nominal.
IPMI_Platform_Security_Violation_Attempt_Secure_Mode_Violation_Attempt
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_User_Password
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_At-
tempt_Setup_Password
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Net-
work_Boot_Password
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt_Other_Pre_Boot_Password_Violation
Defaults to Critical.
IPMI_Platform_Security_Violation_Attempt_Out_Of_Band_Access_Password_Violation
Defaults to Critical.
IPMI_Processor
The following states correspond to Processor sensors w/ Processor specific output
states.
IPMI_Processor_No_Event
Defaults to Nominal.
IPMI_Processor_IERR
Defaults to Critical.
IPMI_Processor_Thermal_Trip
Defaults to Critical.
IPMI_Processor_FRB1_BIST_Failure
Defaults to Critical.
IPMI_Processor_FRB2_Hang_In_POST_Failure
Defaults to Critical.
IPMI_Processor_FRB3_Processor_Startup_Initialization_Failure
Defaults to Critical.
IPMI_Processor_Configuration_Error
Defaults to Critical.
IPMI_Processor_SMBIOS_Uncorrectable_CPU_Complex_Error
Defaults to Critical.
IPMI_Processor_Processor_Presence_Detected
Defaults to Nominal.
IPMI_Processor_Processor_Disabled
Defaults to Critical.
IPMI_Processor_Terminator_Presence_Detected
Defaults to Critical.
IPMI_Processor_Processor_Automatically_Throttled
Defaults to Warning.
IPMI_Processor_Machine_Check_Exception
Defaults to Critical.
IPMI_Processor_Correctable_Machine_Check_Error
Defaults to Warning.
IPMI_Processor_State
The following states correspond to Processor sensors that report an assertion or
deassertion.
IPMI_Processor_State_No_Event
Defaults to Nominal.
IPMI_Processor_State_Deasserted
Defaults to Nominal.
IPMI_Processor_State_Asserted
Defaults to Critical.
IPMI_Power_Supply
The following states correspond to Power Supply sensors w/ Power Supply specific
output states.
IPMI_Power_Supply_No_Event
Defaults to Nominal.
IPMI_Power_Supply_Presence_Detected
Defaults to Nominal.
IPMI_Power_Supply_Power_Supply_Failure_Detected
Defaults to Critical.
IPMI_Power_Supply_Predictive_Failure
Defaults to Critical.
IPMI_Power_Supply_Power_Supply_Input_Lost_AC_DC
Defaults to Critical.
IPMI_Power_Supply_Power_Supply_Input_Lost_Or_Out_Of_Range
Defaults to Critical.
IPMI_Power_Supply_Power_Supply_Input_Out_Of_Range_But_Present
Defaults to Critical.
IPMI_Power_Supply_Configuration_Error
Defaults to Critical.
IPMI_Power_Supply_Power_Supply_Inactive
Defaults to Warning.
IPMI_Power_Supply_State
The following states correspond to Power_Supply sensors that report an assertion or
deassertion.
IPMI_Power_Supply_State_No_Event
Defaults to Nominal.
IPMI_Power_Supply_State_Deasserted
Defaults to Critical.
IPMI_Power_Supply_State_Asserted
Defaults to Nominal.
IPMI_Power_Supply_Redundancy
The following states correspond to Power Supply sensors that report on redundancy.
IPMI_Power_Supply_Redundancy_No_Event
Defaults to Nominal.
IPMI_Power_Supply_Redundancy_Fully_Redundant
Defaults to Nominal.
IPMI_Power_Supply_Redundancy_Redundancy_Lost
Defaults to Critical.
IPMI_Power_Supply_Redundancy_Redundancy_Degraded
Defaults to Warning.
IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
Defaults to Critical.
IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Insuffi-
cient_Redundancy
Defaults to Critical.
IPMI_Power_Supply_Redundancy_Non_Redundant_Insufficient_Resources
Defaults to Critical.
IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Fully_Redundant
Defaults to Warning.
IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Non_Redundant
Defaults to Warning.
IPMI_Power_Unit
The following states correspond to Power Unit sensors w/ Power Unit specific output
states.
IPMI_Power_Unit_No_Event
Defaults to Nominal.
IPMI_Power_Unit_Power_Off_Power_Down
Defaults to Nominal.
IPMI_Power_Unit_Power_Cycle
Defaults to Nominal.
IPMI_Power_Unit_240VA_Power_Down
Defaults to Warning.
IPMI_Power_Unit_Interlock_Power_Down
Defaults to Warning.
IPMI_Power_Unit_AC_Lost
Defaults to Critical.
IPMI_Power_Unit_Soft_Power_Control_Failure
Defaults to Critical.
IPMI_Power_Unit_Power_Unit_Failure_Detected
Defaults to Critical.
IPMI_Power_Unit_Predictive_Failure
Defaults to Critical.
IPMI_Power_Unit_Device_Present
The following states correspond to Power Unit sensors that report on device instal-
lation.
IPMI_Power_Unit_Device_Present_No_Event
Defaults to Nominal.
IPMI_Power_Unit_Device_Present_Device_Removed_Device_Absent
Defaults to Critical.
IPMI_Power_Unit_Device_Present_Device_Inserted_Device_Present
Defaults to Nominal.
IPMI_Power_Unit_Redundancy
The following states correspond to Power Unit sensors that report on redundancy.
IPMI_Power_Unit_Redundancy_No_Event
Defaults to Nominal.
IPMI_Power_Unit_Redundancy_Fully_Redundant
Defaults to Nominal.
IPMI_Power_Unit_Redundancy_Redundancy_Lost
Defaults to Critical.
IPMI_Power_Unit_Redundancy_Redundancy_Degraded
Defaults to Warning.
IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
Defaults to Critical.
IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Re-
dundancy
Defaults to Critical.
IPMI_Power_Unit_Redundancy_Non_Redundant_Insufficient_Resources
Defaults to Critical.
IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Fully_Redundant
Defaults to Warning.
IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Non_Redundant
Defaults to Warning.
IPMI_Cooling_Device_Redundancy
The following states correspond to Cooling Device sensors that report on redun-
dancy.
IPMI_Cooling_Device_Redundancy_No_Event
Defaults to Nominal.
IPMI_Cooling_Device_Redundancy_Fully_Redundant
Defaults to Nominal.
IPMI_Cooling_Device_Redundancy_Redundancy_Lost
Defaults to Critical.
IPMI_Cooling_Device_Redundancy_Redundancy_Degraded
Defaults to Warning.
IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
Defaults to Critical.
IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Insuffi-
cient_Redundancy
Defaults to Critical.
IPMI_Cooling_Device_Redundancy_Non_Redundant_Insufficient_Resources
Defaults to Critical.
IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Fully_Redundant
Defaults to Warning.
IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Non_Redundant
Defaults to Warning.
IPMI_Memory
The following states correspond to Memory sensors w/ Memory specific output states.
IPMI_Memory_No_Event
Defaults to Nominal.
IPMI_Memory_Correctable_Memory_Error
Defaults to Warning.
IPMI_Memory_Uncorrectable_Memory_Error
Defaults to Critical.
IPMI_Memory_Parity
Defaults to Critical.
IPMI_Memory_Memory_Scrub_Failed
Defaults to Critical.
IPMI_Memory_Memory_Device_Disabled
Defaults to Critical.
IPMI_Memory_Correctable_Memory_Error_Logging_Limit_Reached
Defaults to Warning.
IPMI_Memory_Presence_Detected
Defaults to Nominal.
IPMI_Memory_Configuration_Error
Defaults to Critical.
IPMI_Memory_Spare
Defaults to Nominal.
IPMI_Memory_Memory_Automatically_Throttled
Defaults to Warning.
IPMI_Memory_Critical_Overtemperature
Defaults to Critical.
IPMI_Memory_State
The following states correspond to Memory sensors that report an assertion or de-
assertion.
IPMI_Memory_State_No_Event
Defaults to Nominal.
IPMI_Memory_State_Deasserted
Defaults to Nominal.
IPMI_Memory_State_Asserted
Defaults to Critical.
IPMI_Memory_Transition_Severity
The following states correspond to Memory sensors that report on device severity.
IPMI_Memory_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Memory_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Memory_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Memory_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Memory_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Memory_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Memory_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Memory_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Memory_Redundancy
The following states correspond to Cooling Device sensors that report on redun-
dancy.
IPMI_Memory_Redundancy_No_Event
Defaults to Nominal.
IPMI_Memory_Redundancy_Fully_Redundant
Defaults to Nominal.
IPMI_Memory_Redundancy_Redundancy_Lost
Defaults to Critical.
IPMI_Memory_Redundancy_Redundancy_Degraded
Defaults to Warning.
IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
Defaults to Critical.
IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redun-
dancy
Defaults to Critical.
IPMI_Memory_Redundancy_Non_Redundant_Insufficient_Resources
Defaults to Critical.
IPMI_Memory_Redundancy_Redundancy_Degraded_From_Fully_Redundant
Defaults to Warning.
IPMI_Memory_Redundancy_Redundancy_Degraded_From_Non_Redundant
Defaults to Warning.
IPMI_Drive_Slot
The following states correspond to Drive Slot sensors w/ Drive Slot specific output
states.
IPMI_Drive_Slot_No_Event
Defaults to Nominal.
IPMI_Drive_Slot_Drive_Presence
Defaults to Nominal.
IPMI_Drive_Slot_Drive_Fault
Defaults to Critical.
IPMI_Drive_Slot_Predictive_Failure
Defaults to Critical.
IPMI_Drive_Slot_Hot_Spare
Defaults to Nominal.
IPMI_Drive_Slot_Consistency_Check_Parity_Check_In_Progress
Defaults to Nominal.
IPMI_Drive_Slot_In_Critical_Array
Defaults to Critical.
IPMI_Drive_Slot_In_Failed_Array
Defaults to Critical.
IPMI_Drive_Slot_Rebuild_Remap_In_Progress
Defaults to Nominal.
IPMI_Drive_Slot_Rebuild_Remap_Aborted
Defaults to Critical.
IPMI_Drive_Slot_State
The following states correspond to Drive Slot sensors that report an assertion or
deassertion.
IPMI_Drive_Slot_State_No_Event
Defaults to Nominal.
IPMI_Drive_Slot_State_Deasserted
Defaults to Warning.
IPMI_Drive_Slot_State_Asserted
Defaults to Nominal.
IPMI_Drive_Slot_Predictive_Failure
The following states correspond to Drive_Slot sensors that report a predictive
failure assertion or deassertion.
IPMI_Drive_Slot_Predictive_Failure_No_Event
Defaults to Nominal.
IPMI_Drive_Slot_Predictive_Failure_Deasserted
Defaults to Nominal.
IPMI_Drive_Slot_Predictive_Failure_Asserted
Defaults to Critical.
IPMI_Drive_Slot_Device_Present
The following states correspond to Drive Slot sensors that report on device instal-
lation.
IPMI_Drive_Slot_Device_Present_No_Event
Defaults to Nominal.
IPMI_Drive_Slot_Device_Present_Device_Removed_Device_Absent
Defaults to Critical.
IPMI_Drive_Slot_Device_Present_Device_Inserted_Device_Present
Defaults to Nominal.
IPMI_POST_Memory_Resize_State
The following states correspond to POST Memory Resize sensors that report an asser-
tion or deassertion.
IPMI_POST_Memory_Resize_State_No_Event
Defaults to Nominal.
IPMI_POST_Memory_Resize_State_Deasserted
Defaults to Nominal.
IPMI_POST_Memory_Resize_State_Asserted
Defaults to Warning.
IPMI_System_Firmware_Progress
The following states correspond to System Firmware Progress sensors w/ System
Firmware Progress specific output states.
IPMI_System_Firmware_Progress_No_Event
Defaults to Nominal.
IPMI_System_Firmware_Progress_System_Firmware_Error
Defaults to Critical.
IPMI_System_Firmware_Progress_System_Firmware_Hang
Defaults to Critical.
IPMI_System_Firmware_Progress_System_Firmware_Progress
Defaults to Nominal.
IPMI_System_Firmware_Progress_Transition_Severity
The following states correspond to System Firmware Progress sensors that report on
device severity.
IPMI_System_Firmware_Progress_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Criti-
cal_From_OK
Defaults to Warning.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Criti-
cal_From_Less_Severe
Defaults to Critical.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Recover-
able_From_Less_Severe
Defaults to Critical.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Criti-
cal_From_More_Severe
Defaults to Warning.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Criti-
cal_From_Non_Recoverable
Defaults to Critical.
IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_System_Firmware_Progress_Transition_Severity_Monitor
Defaults to Warning.
IPMI_System_Firmware_Progress_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Event_Logging_Disabled
The following states correspond to Event Logging Disabled sensors w/
IPMI_Event_Logging_Disabled_No_Event
Defaults to Nominal.
IPMI_Event_Logging_Disabled_Correctable_Memory_Error_Logging_Disabled
Defaults to Critical.
IPMI_Event_Logging_Disabled_Event_Type_Logging_Disabled
Defaults to Critical.
IPMI_Event_Logging_Disabled_Log_Area_Reset_Cleared
Defaults to Nominal.
IPMI_Event_Logging_Disabled_All_Event_Logging_Disabled
Defaults to Critical.
IPMI_Event_Logging_Disabled_SEL_Full
Defaults to Critical.
IPMI_Event_Logging_Disabled_SEL_Almost_Full
Defaults to Warning.
IPMI_Event_Logging_Disabled_Correctable_Machine_Check_Error_Logging_Disabled
Defaults to Critical.
IPMI_System_Event
The following states correspond to System Event sensors w/ System Event specific
output states.
IPMI_System_Event_No_Event
Defaults to Nominal.
IPMI_System_Event_System_Reconfigured
Defaults to Warning.
IPMI_System_Event_OEM_System_Boot_Event
Defaults to Nominal.
IPMI_System_Event_Undetermined_System_Hardware_Failure
Defaults to Critical.
IPMI_System_Event_Entry_Added_To_Auxiliary_Log
Defaults to Nominal.
IPMI_System_Event_PEF_Action
Defaults to Nominal.
IPMI_System_Event_Timestamp_Clock_Sync
Defaults to Warning.
IPMI_System_Event_Transition_State
The following states correspond to System Event sensors that report a transition
state.
IPMI_System_Event_Transition_State_No_Event
Defaults to Nominal.
IPMI_System_Event_Transition_State_Active
Defaults to Nominal.
IPMI_System_Event_Transition_State_Idle
Defaults to Nominal.
IPMI_System_Event_Transition_State_Busy
Defaults to Nominal.
IPMI_System_Event_State
The following states correspond to System Event sensors that report an assertion or
deassertion.
IPMI_System_Event_State_No_Event
Defaults to Nominal.
IPMI_System_Event_State_Deasserted
Defaults to Nominal.
IPMI_System_Event_State_Asserted
Defaults to Warning.
IPMI_Critical_Interrupt
The following states correspond to Critical Interrupt sensors w/ Critical Interrupt
specific output states.
IPMI_Critical_Interrupt_No_Event
Defaults to Nominal.
IPMI_Critical_Interrupt_Front_Panel_NMI_Diagnostic_Interrupt
Defaults to Critical.
IPMI_Critical_Interrupt_Bus_Timeout
Defaults to Critical.
IPMI_Critical_Interrupt_IO_Channel_Check_NMI
Defaults to Critical.
IPMI_Critical_Interrupt_Software_NMI
Defaults to Warning.
IPMI_Critical_Interrupt_PCI_PERR
Defaults to Critical.
IPMI_Critical_Interrupt_PCI_SERR
Defaults to Critical.
IPMI_Critical_Interrupt_EISA_Fail_Safe_Timeout
Defaults to Critical.
IPMI_Critical_Interrupt_Bus_Correctable_Error
Defaults to Warning.
IPMI_Critical_Interrupt_Bus_Uncorrectable_Error
Defaults to Critical.
IPMI_Critical_Interrupt_Fatal_NMI
Defaults to Critical.
IPMI_Critical_Interrupt_Bus_Fatal_Error
Defaults to Critical. IPMI_Critical_Interrupt_Bus_Degraded Defaults to
Warning.
IPMI_Button_Switch
The following states correspond to Button/Switch sensors w/ Button/Switch specific
output states.
IPMI_Button_Switch_No_Event
Defaults to Nominal.
IPMI_Button_Switch_Power_Button_Pressed
Defaults to Nominal.
IPMI_Button_Switch_Sleep_Button_Pressed
Defaults to Nominal.
IPMI_Button_Switch_Reset_Button_Pressed
Defaults to Nominal.
IPMI_Button_Switch_FRU_Latch_Open
Defaults to Warning.
IPMI_Button_Switch_FRU_Service_Request_Button
Defaults to Warning.
IPMI_Button_Switch_State
The following states correspond to Button/Switch sensors that report an assertion
or deassertion.
IPMI_Button_Switch_State_No_Event
Defaults to Nominal.
IPMI_Button_Switch_State_Deasserted
Defaults to Nominal.
IPMI_Button_Switch_State_Asserted
Defaults to Nominal.
IPMI_Button_Switch_Transition_Severity
The following states correspond to Button/Switch sensors that report on device
severity.
IPMI_Button_Switch_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Button_Switch_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Button_Switch_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Se-
vere
Defaults to Critical.
IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Button_Switch_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Button_Switch_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Button_Switch_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Module_Board_State
The following states correspond to Module/Board sensors that report an assertion or
deassertion.
IPMI_Module_Board_State_No_Event
Defaults to Nominal.
IPMI_Module_Board_State_Deasserted
Defaults to Nominal.
IPMI_Module_Board_State_Asserted
Defaults to Critical.
IPMI_Module_Board_Device_Present
The following states correspond to Module/Board sensors that report on device in-
stallation.
IPMI_Module_Board_Device_Present_No_Event
Defaults to Nominal.
IPMI_Module_Board_Device_Present_Device_Removed_Device_Absent
Defaults to Critical.
IPMI_Module_Board_Device_Present_Device_Inserted_Device_Present
Defaults to Nominal.
IPMI_Chassis_Transition_Severity
The following states correspond to Chassis sensors that report on device severity.
IPMI_Chassis_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Chassis_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Chassis_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Chassis_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Chassis_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Chassis_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Chassis_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Chassis_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Chip_Set_Transition_Severity
The following states correspond to Chip Set sensors that report on device severity.
IPMI_Chip_Set_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Chip_Set_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Chip_Set_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Chip_Set_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Cable_Interconnect
The following states correspond to Cable/Interconnect sensors w/ Cable/Interconnect
specific output states.
IPMI_Cable_Interconnect_No_Event
Defaults to Nominal.
IPMI_Cable_Interconnect_Is_Connected
Defaults to Nominal.
IPMI_Cable_Interconnect_Configuration_Error
Defaults to Critical.
IPMI_Cable_Interconnect_Transition_Severity
The following states correspond to Cable/Interconnect sensors that report on device
severity.
IPMI_Cable_Interconnect_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recover-
able_From_Less_Severe
Defaults to Critical.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Criti-
cal_From_More_Severe
Defaults to Warning.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Critical_From_Non_Recov-
erable
Defaults to Critical.
IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Cable_Interconnect_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Cable_Interconnect_Transition_Severity_Informational
Defaults to Nominal.
IPMI_Boot_Error
The following states correspond to Boot Error sensors w/ Boot Error specific output
states.
IPMI_Boot_Error_No_Event
Defaults to Nominal.
IPMI_Boot_Error_No_Bootable_Media
Defaults to Critical.
IPMI_Boot_Error_Non_Bootable_Diskette_Left_In_Drive
Defaults to Critical.
IPMI_Boot_Error_PXE_Server_Not_Found
Defaults to Critical.
IPMI_Boot_Error_Invalid_Boot_Sector
Defaults to Critical.
IPMI_Boot_Error_Timeout_Waiting_For_User_Selection_Of_Boot_Source
Defaults to Warning.
IPMI_Boot_Error_State
The following states correspond to Boot Error sensors that report an assertion or
deassertion.
IPMI_Boot_Error_State_No_Event
Defaults to Nominal.
IPMI_Boot_Error_State_Deasserted
Defaults to Nominal.
IPMI_Boot_Error_State_Asserted
Defaults to Critical.
IPMI_Boot_Error_Transition_Severity
The following states correspond to Boot Error sensors that report on device sever-
ity.
IPMI_Boot_Error_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Boot_Error_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Boot_Error_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
Defaults to Critical.
IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Boot_Error_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Boot_Error_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Boot_Error_Transition_Severity_Informational
Defaults to Nominal.
IPMI_OS_Boot
The following states correspond to OS Boot sensors w/ OS Boot specific output
events.
IPMI_OS_Boot_No_Event Defaults to Nominal. IPMI_OS_Boot_A_Boot_Completed Defaults
to Nominal. IPMI_OS_Boot_C_Boot_Completed Defaults to Nominal.
IPMI_OS_Boot_PXE_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_Diagnos-
tic_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_CD_ROM_Boot_Completed De-
faults to Nominal. IPMI_OS_Boot_ROM_Boot_Completed Defaults to Nominal.
IPMI_OS_Boot_Boot_Completed_Boot_Device_Not_Specified Defaults to Warning.
IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Started Defaults to Nominal.
IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Completed Defaults to Nominal.
IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Aborted Defaults to Warning.
IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Failed Defaults to Critical.
IPMI_OS_Critical_Stop_State
The following states correspond to OS Critical Stop sensors that report an asser-
tion or deassertion.
IPMI_OS_Critical_Stop_State_No_Event
Defaults to Nominal.
IPMI_OS_Critical_Stop_State_Deasserted
Defaults to Nominal.
IPMI_OS_Critical_Stop_State_Asserted
Defaults to Critical.
IPMI_Slot_Connector
The following states correspond to Slot Connector sensors w/ Slot Connector spe-
cific output states.
IPMI_Slot_Connector_No_Event
Defaults to Nominal.
IPMI_Slot_Connector_Fault_Status_Asserted
Defaults to Critical.
IPMI_Slot_Connector_Identify_Status_Asserted
Defaults to Warning.
IPMI_Slot_Connector_Slot_Connector_Device_Installed_Attached
Defaults to Nominal.
IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Installation
Defaults to Nominal.
IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Removal
Defaults to Nominal.
IPMI_Slot_Connector_Slot_Power_Is_Off
Defaults to Nominal.
IPMI_Slot_Connector_Slot_Connector_Device_Removal_Request
Defaults to Warning.
IPMI_Slot_Connector_Interlock_Asserted
Defaults to Warning.
IPMI_Slot_Connector_Slot_Is_Disabled
Defaults to Warning.
IPMI_Slot_Connector_Slot_Holds_Spare_Device
Defaults to Nominal.
IPMI_Slot_Connector_Transition_Severity
The following states correspond to Slot Connector sensors that report on device
severity.
IPMI_Slot_Connector_Transition_Severity_No_Event
Defaults to Nominal.
IPMI_Slot_Connector_Transition_Severity_Transition_To_OK
Defaults to Nominal.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Critical_From_OK
Defaults to Warning.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Critical_From_Less_Severe
Defaults to Critical.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Se-
vere
Defaults to Critical.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
Defaults to Warning.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
Defaults to Critical.
IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recoverable
Defaults to Critical.
IPMI_Slot_Connector_Transition_Severity_Monitor
Defaults to Warning.
IPMI_Slot_Connector_Transition_Severity_Informational
Defaults to Nominal.
IPMI_System_ACPI_Power_State
IPMI_System_ACPI_Power_State_No_Event
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S0_G0
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S1
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S2
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S3
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S4
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S5_G2
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S4_S5_Soft_Off
Defaults to Nominal.
IPMI_System_ACPI_Power_State_G3_Mechanical_Off
Defaults to Nominal.
IPMI_System_ACPI_Power_State_Sleeping_in_an_S1_S2_or_S3_States
Defaults to Nominal.
IPMI_System_ACPI_Power_State_G1_Sleeping
Defaults to Nominal.
IPMI_System_ACPI_Power_State_S5_Entered_By_Override
Defaults to Nominal.
IPMI_System_ACPI_Power_State_Legacy_ON_State
Defaults to Nominal.
IPMI_System_ACPI_Power_State_Legacy_OFF_State
Defaults to Nominal.
IPMI_System_ACPI_Power_State_Unspecified
Defaults to Critical.
IPMI_System_ACPI_Power_State_Unknown
Defaults to Critical.
IPMI_Watchdog2
The following states correspond to Watchdog 2 sensors w/ Watchdog 2 specific output
states.
IPMI_Watchdog2_No_Event
Defaults to Nominal.
IPMI_Watchdog2_Timer_Expired
Defaults to Warning.
IPMI_Watchdog2_Hard_Reset
Defaults to Critical.
IPMI_Watchdog2_Power_Down
Defaults to Critical.
IPMI_Watchdog2_Power_Cycle
Defaults to Critical.
IPMI_Watchdog2_Reserved1
Defaults to Nominal.
IPMI_Watchdog2_Reserved2
Defaults to Nominal.
IPMI_Watchdog2_Reserved3
Defaults to Nominal.
IPMI_Watchdog2_Reserved4
Defaults to Nominal.
IPMI_Watchdog2_Timer_Interrupt
Defaults to Warning.
IPMI_Platform_Alert_State
The following states correspond to Platform Alert sensors that report an assertion
or deassertion.
IPMI_Platform_Alert_State_No_Event
Defaults to Nominal.
IPMI_Platform_Alert_State_Deasserted
Defaults to Nominal.
IPMI_Platform_Alert_State_Asserted
Defaults to Critical.
IPMI_Entity_Presence
The following states correspond to Entity Presence sensors w/ Entity Presence spe-
cific output states.
IPMI_Entity_Presence_No_Event
Defaults to Nominal.
IPMI_Entity_Presence_Entity_Present
Defaults to Nominal.
IPMI_Entity_Presence_Entity_Absent
Defaults to Critical.
IPMI_Entity_Presence_Entity_Disabled
Defaults to Critical.
IPMI_Entity_Presence_Device_Present
The following states correspond to Entity Presence sensors that report on device
installation.
IPMI_Entity_Presence_Device_Present_No_Event
Defaults to Nominal.
IPMI_Entity_Presence_Device_Present_Device_Removed_Device_Absent
Defaults to Nominal.
IPMI_Entity_Presence_Device_Present_Device_Inserted_Device_Present
Defaults to Nominal.
IPMI_Management_Subsystem_Health
The following states correspond to Management Subsystem Health sensors w/ Manage-
ment Subsystem Health specific output states.
IPMI_Management_Subsystem_Health_No_Event
Defaults to Nominal.
IPMI_Management_Subsystem_Health_Sensor_Access_Degraded_Or_Unavailable
Defaults to Critical.
IPMI_Management_Subsystem_Health_Controller_Access_Degraded_Or_Unavailable
Defaults to Critical.
IPMI_Management_Subsystem_Health_Management_Controller_Off_Line
Defaults to Critical.
IPMI_Management_Subsystem_Health_Management_Controller_Unavailable
Defaults to Critical.
IPMI_Management_Subsystem_Health_Sensor_Failure
Defaults to Critical.
IPMI_Management_Subsystem_Health_FRU_Failure
Defaults to Critical.
IPMI_Battery
The following states correspond to Battery sensors w/ Battery specific output
states.
IPMI_Battery_No_Event
Defaults to Nominal.
IPMI_Battery_Battery_Low
Defaults to Warning.
IPMI_Battery_Battery_Failed
Defaults to Critical.
IPMI_Battery_Battery_Presence_Detected
Defaults to Nominal.
IPMI_Session_Audit
The following states correspond to Session Audit sensors w/ Session_Audit specific
output states.
IPMI_Version_Change_No_Event
Defaults to Nominal.
IPMI_Version_Change_Hardware_Change_Detected_With_Associated_Entity
Defaults to Warning.
IPMI_Version_Change_Firmware_Or_Software_Change_Detected_With_Associated_Entity
Defaults to Warning.
IPMI_Version_Change_Hardware_Incompatability_Detected_With_Associated_Entity
Defaults to Critical.
IPMI_Version_Change_Firmware_Or_Software_Incompatability_Detected_With_Associ-
ated_Entity
Defaults to Critical.
IPMI_Version_Change_Entity_Is_Of_An_Invalid_Or_Unsupported_Hardware_Version
Defaults to Critical.
IPMI_Version_Change_Entity_Contains_An_Invalid_Or_Unsupported_Firmware_Or_Soft-
ware_Version
Defaults to Critical.
IPMI_Version_Change_Hardware_Change_Detected_With_Associated_Entity_Was_Successful
Defaults to Nominal.
IPMI_Version_Change_Software_Or_FW_Change_Detected_With_Associated_Entity_Was_Suc-
cessful
Defaults to Nominal.
IPMI_FRU_State
The following states correspond to FRU State sensors w/ FRU State specific output
states.
IPMI_FRU_State_No_Event
Defaults to Nominal.
IPMI_FRU_State_FRU_Not_Installed
Defaults to Critical.
IPMI_FRU_State_FRU_Inactive
Defaults to Critical.
IPMI_FRU_State_FRU_Activation_Requested
Defaults to Warning.
IPMI_FRU_State_FRU_Activation_In_Progress
Defaults to Warning.
IPMI_FRU_State_FRU_Active
Defaults to Nominal.
IPMI_FRU_State_FRU_Deactivation_Requested
Defaults to Warning.
IPMI_FRU_State_FRU_Deactivation_In_Progress
Defaults to Warning.
IPMI_FRU_State_FRU_Communication_Lost
Defaults to Critical.
IPMI_OEM
The following configuration options can be used to configure OEM specific interpre-
tations. Users should be aware that both IPMI_OEM_Bitmask and IPMI_OEM_Value can be
configured for an identical Manufacturer-ID, Product-ID, Event-Reading-Type-Code,
and Sensor-Type combination. All interpretations rules for a specific combination
are iterated through and the worst resulting sensor state is returned (i.e. Warning
< Nominal, Critical < Warning). If no match is found, no sensor state is returned
for the OEM sensor reading. For each of the configuration options below, <Manufac-
turer-ID> is the numeric IANA manufacturer ID for the manufacturer in question.
The <Product-ID> is one or more numeric IDs representing the manufacturer's prod-
uct. The <Product-ID> can be listed as a single numeric number (e.g. 1234), a
range of IDs separated by a dash (e.g. 12-20), or a list of specific product IDs
separated by a plus (e.g. 12+19+22). Both the Manufacturer-ID and Product-ID can be
found using bmc-info(8). Multiple <Manufacturer-ID> and <Product-ID> pairs can be
input separated by commas. The Event-Reading-Type-Code and Sensor-Type need not be
OEM types. They may be non-OEM types and used to provide interpretation rules for
sensors that may be behaving outside the standard of the IPMI specification.
IPMI_OEM_Bitmask <Manufacturer-ID>:<Product-ID>,... Event-Reading-Type-Code Sen-
sor-Type Sensor-Event-Bitmask State
IPMI_OEM_Bitmask can be used to configure a state interpretation for a spe-
cific Manufacturer-ID, Product-ID, Event-Reading-Type-Code, and Sensor-Type
combination and a specific bitmask of the Sensor-Event. The state will be
accepted as the sensor interpretation if the inputted bitmask ANDed with the
actual sensor event bitmask reading is true. As a special case, the state
will be accepted if the inputted bitmask and the actual sensor event bitmask
are both 0. In other words, if no events happened, an OEM interpretation can
be configured for this case by inputing a bitmask of 0x0000.
IPMI_OEM_Value <Manufacturer-ID>:<Product-ID>,... Event-Reading-Type-Code Sen-
sor-Type Sensor-Event-Bitmask-Value State
IPMI_OEM_Value can be used to configure a state interpretation for a spe-
cific Manufacturer-ID, Product-ID, Event-Reading-Type-Code, and Sensor-Type
combination and a specific value for the Sensor-Event-Bitmask. The state
will be accepted as the sensor interpretation if the inputted bitmask value
is equal to the actual sensor event bitmask reading.
FILES
/etc/freeipmi//freeipmi_interpret_sensor.conf
REPORTING BUGS
Report bugs to <freeipmi-users AT gnu.org> or <freeipmi-devel AT gnu.org>.
COPYRIGHT
Copyright (C) 2007-2015 Lawrence Livermore National Security, LLC.
This library is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either ver-
sion 3 of the License, or (at your option) any later version.
SEE ALSO
libfreeipmi(3), libipmimonitoring(3), ipmi-sensors(8)
http://www.gnu.org/software/freeipmi/
FreeIPMI 1.6.9 2023-06-28 FREEIPMI_INTERPRET_SENSOR(5)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-12 16:33 @3.21.159.215 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)