update-mime(8) - phpMan

UPDATE-MIME(8) Update MIME Programs UPDATE-MIME(8)

NAME
update-mime - create or update MIME information

SYNOPSIS
update-mime [no parameters]

DESCRIPTION
update-mime updates the /etc/mailcap file to reflect mime information changed by a Debian
package during installation or removal.

OPTIONS
--local Generate files in the current user's home directory instead of the /etc directory.
This allows users to create a custom ordering configuration and get a complete ~/.mailcap
file out of it. In this local mode, the order overriding file (see below) will be looked
for in the ~/.mailcap.order file.

OVERRIDING ORDER
The order of entries in the /etc/mailcap file can be altered by editing the /etc/mail-
cap.order file. Please see the mailcap.order(5) man page for more information.

CREATING ENTRIES
To create entries in the mailcap file, packages need to create a file in the
/usr/lib/mime/packages directory. In this file goes the verbatim desired mailcap entries.
In addition to the standard mailcap options (described below) is a new priority option.
Specifying this will provide for simple ranking of programs within a given mime type. An
animation viewer, for example, may be able to display a static picture, but probably
wouldn't be the best choice and so would give an option like "priority=2". Priorities
range from 0 to 9, with 0 being the lowest and 9 being the highest. If the priority op-
tion is omitted, a value of 5 is used.

The following are standard options that can be specified in the mailcap entry. Options
are separated by semicolons (;) but must all be on the same line. Each line should look
like:

mime/type; viewer; option; another=val; etc; priority=5

Mime types of the form "class/*" and even "*/*" are now acceptable (they were previously
disallowed). When using "class/*", it is probably a good idea to add a "priority=[1-4]"
option so specific rules using the default priority will get chosen first. If using
"*/*", though, you probably want to add a "priority=0" option to make that rule a "last
resort".

Commands
<program-string>
Specifies the program to run to view a file of the given content-type. This option
setting cannot be omitted. An implicit "view=" can be considered before it. When
writing an entry that has no viewer, use a value of false in this space.

compose=<program-string>
The "compose" command may be used to specify a program that can be used to compose
a new body or body part in the given format. Its intended use is to support mail
composing agents that support the composition of multiple types of mail using ex-
ternal composing agents. The result of the composing program may be data that is
not yet suitable for mail transport -- that is, a Content-Transfer-Encoding may
need to be applied to the data.

composetyped=<program-string>
The "composetyped" command is similar to "compose", but is to be used when the com-
posing program needs to specify the Content-type header field to be applied to the
composed data. The "compose" option is simpler, and is preferred for use with ex-
isting (non-mail-oriented) programs for composing data in a given format. The
"composetyped" option is necessary when the Content-type information must include
auxiliary parameters, and the composition program must then know enough about mail
formats to produce output that includes the mail type information.

edit=<program-string>
The "edit" command may be used to specify a program that can be used to edit a body
or body part in the given format. In many cases, it may be identical in content to
the "compose" command.

print=<program-string>
The "print" command may be used to specify a program that can be used to print a
message or body part in the given format.

Modifiers
These options are modifiers to all the commands specified on the command line.

test=<conditional>
The "test" option may be used to test some external condition (e.g., the machine
architecture, or the window system in use) to determine whether or not the mailcap
line applies. It specifies a program to be run to test some condition. If the
test fails, a subsequent mailcap entry will be sought. Multiple test options are
not permitted -- since a test can call a program, it can already be arbitrarily
complex.

Note: When testing for X by looking at the DISPLAY environment variable, please use
one of:

test=test -z "$DISPLAY" (no X)
or test=test -n "$DISPLAY" (have X)

Many programs recognize these strings and optimize for them.

needsterminal
The "needsterminal" option, if given, indicates that the commands must be run on an
interactive terminal. This is needed to inform window-oriented user agents that an
interactive terminal is needed. (The decision is not left exclusively to the com-
mand because in some circumstances it may not be possible for such programs to tell
whether or not they are on interactive terminals.) The needsterminal command ap-
plies to the view, compose and edit commands, if they exist. Note that this is NOT
a test -- it is a requirement for the environment in which the program will be exe-
cuted, and will typically cause the creation of a terminal window when not executed
on either a real terminal or a terminal window.

copiousoutput
The "copiousoutput" option, if given, indicates that the output from the view-com-
mand will be an extended stream of output and is to be interpreted as advice to the
UA (User Agent mail-reading program) that the output should be either paged or made
scrollable. Note that it is probably a mistake if needsterminal and copiousoutput
are both specified.

Content-Type Info
These options provide additional information about the given content-type.

description=<string>
The "description" option simply provides a textual description that describes the
type of data, to be used optionally by mail readers that wish to describe the data
before offering to display it.

textualnewlines
The "textualnewlines" option, if given, indicates that this type of data is line-
oriented and that, if encoded in a binary format, all newlines should be converted
to canonical form (CRLF) before encoding, and will be in that form after decoding.
In general, this is needed only if there is line-oriented data of some type other
than text/* or non-line-oriented data that is a subtype of text.

x11-bitmap=<pathname>
The "x11-bitmap" option names a file, in X11 bitmap (xbm) format, which points to
an appropriate icon to be used to visually denote the presence of this kind of
data.

nametemplate=<string>
The "nametemplate" option gives a file name format, in which %s will be replaced by
a short unique string to give the name of the temporary file to be passed to the
viewing command. This is only expected to be relevant in environments where file-
name extensions are meaningful, e.g., one could specify that a GIF file being
passed to a gif viewer should have a name ending in ".gif" by using "nametem-
plate=%s.gif".

DEPENDENCIES
Packages that wish to provide MIME access to themselves should not depend on, recommend,
or suggest mime-support, as the the file they create in /usr/lib/mime/packages will cause
update-mime to be automatically run via a Dpkg trigger.

DESKTOP ENTRIES
In addition to the abovementioned mechanism update-mime also parses desktop entries in
/usr/share/applications/ to generate mailcap entries. These entries are given a lower pri-
ority than those in /usr/lib/mime/packages.

SEE ALSO
mailcap.order(5), deb-triggers(1), RFC-2046, RFC-1524

AUTHOR
update-mime was written by Brian White <bcwhite AT pobox.com>

Debian Project 12th Feb 2012 UPDATE-MIME(8)

Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-12 16:53 @3.137.220.10 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)