Date::Manip::Changes5 - phpMan

Command: man perldoc info search(apropos)  


Date::Manip::Changes5(3pm)     User Contributed Perl Documentation     Date::Manip::Changes5(3pm)

NAME
       Date::Manip::Changes5 - changes in Date::Manip 5.xx

SYNOPSIS
       This describes the changes made to the Date::Manip module up to the time that 6.00 was
       released.  Because 6.00 required a newer version of perl (5.10 or higher), the old version
       was maintained.

       When Date::Manip 6.10 was released, both versions were bundled together (though how it was
       bundled changed when 6.14 was released).

       This document describes all changes made to the old version of Date::Manip.

       For the most part, Date::Manip has remained backward compatible at every release, but
       occasionally, a change is made which is backward incompatible. These are marked with an
       exclamation mark (!).

VERSION 5.66 (Released with 6.51)
       Fixed a bug in Date_ConvTZ
           Applied a patch supplied by Zhenyi Zhou which fixes a bug in Date_ConvTZ where passing
           in an empty string did not work.

VERSION 5.65 (Released with 6.37)
       As of December 2012, Version 5 of Date::Manip will no longer be modified.  The 5.xx
       version was updated to 5.65 (but no changes were made), and this version is expected to be
       the final release in the 5.xx series.

       The one exception is that if someone submits a patch that applies cleanly and causes zero
       failures in the test suite, I will consider adding it on a case-by-cast bases.

       Please use Date::Manip 6.xx instead.

VERSION 5.64 (Released with 6.32)
       Better handling of '0000' timezone
           Applied a patch supplied by Ed Avis that improves handling of the '0000' timezone..

VERSION 5.63 (Released with 6.26)
       Fixed business mode calculation
           Applied a patch that I received some time ago to fix a business mode calculation.
           Steve Tempest

VERSION 5.62 (Released with 6.21)
       No changes

VERSION 5.61 (Released with 6.20)
       No changes

VERSION 5.60 (Released with 6.14)
       Fully integrated with 6.xx
           As of Date::Manip 6.14, the 5.xx release is fully integrated into the distribution.
           Both will be installed automatically and you can switch between them (if you have a
           recent version of perl). This simplifies the package management process considerably.
           The downside is that Date::Manip 6.xx will be installed, even if you do not have a
           recent version of perl and cannot use it.

VERSION 5.59 (Released with 6.12)
       Test fixes
           Fix tests to work better on windows.

VERSION 5.58 (Released with 6.11)
       Test fixes
           Fixed a bug in some of the tests that were causing two tests to fail.  JD

           Explicitly set TZ in all tests to avoid some failures (it got left out of a few when
           it was bundled with 6.10).

VERSION 5.57 (Released with 6.10)
       (*) Combined 5.xx and 6.xx
           As of 6.10, Date-Manip-6.xx will contain both the Date::Manip 5.xx and 6.xx modules.
           If perl 5.10 or higher is available, the 6.xx version will be installed. For older
           versions of perl, the 5.xx version will be installed.

           This will allow all of the automatic module tools to work correctly.

       Bug fixes
           Fixed a bug where years earlier than 1000 AD failed in calculations.  John

       Time zone fixes
           Improved time zone detection.  Stepan Kasal

       Documentation fixes
           Minor improvements.  Josef Kreulich

VERSION 5.56 (2010-02-24)
       Bug fixes
           Date_PrevWorkDay and documentation fix.  RT #17005

           I accidentally included a require 5.10 which made Date::Manip not work with earlier
           versions of perl.  Nicholas Riley

VERSION 5.55 (2010-02-22)
       (*) Added time zone abbreviations
           Date::Manip 5.xx now includes all of the time zone abbreviations from version 6.xx
           (i.e. all of the abbreviations from the Olsen database).

       Documentation fixes
           Typo fix.  ddascalescu

VERSION 5.54 (2008-05-09)
       Released

VERSION 5.53 (DEVELOPMENT)
       Bug fixes
           Fix so it won't fail with "Too early to specify a build action"

       CPANTS changes
           Final changes to meet requirements on http://cpants.perl.org/

VERSION 5.52 (2008-05-08)
       Released

VERSION 5.51 (DEVELOPMENT)
       Bug fixes
           Fixed bug where the wrong version was in Build.PL

       CPANTS changes
           Additional changes to meet requirements on http://cpants.perl.org/

VERSION 5.50 (2008-05-05)
       Released

VERSION 5.49 (DEVELOPMENT)
       New features
           Added "ereyesterday".  Ed Avis

       Time zone fixes
           Added time zones.  Damyan Ivanov, Ernesto Hernandez-Novich, Gregor Herrmann, Nicholas
           Riley, Enrique Verdes, Alexander Litvinov

       Documentation fixes
           Corrected typo in %G and %L format descriptions.  Troy A. Bollinger

       CPANTS changes
           Added Build.PL and several other things to meet requirements on
           http://cpants.perl.org/

VERSION 5.48 (2007-11-27)
       Released

VERSION 5.47 (DEVELOPMENT)
       Bug fixes
           Fixed the version number.  John R. Daily

           Fixed a warning when the date command not present.  Daniel Hahler

           Fixed a bug where recurrences of the form 0:1*, 0:0:1*, etc., incorrectly required a
           base date.  Gerry Lawrence

           Fixed a bug where "substring" was used instead of "substr".

       Time zone fixes
           Fixed a problem in the WEST time zone.  Cristina Nunes

           Added time zone.  Kimmo R. M. Hovi

       Documentation fixes
           Revised some of the documentation about Y2K (given that it's in the past) and the 2007
           US daylight saving time rule changes.

VERSION 5.46 (2007-02-21)
       Released

VERSION 5.45 (DEVELOPMENT)
       New features
           Added "overmorrow".  Ed Avis

       Bug fixes
           Fixed bug in parsing ISO 8601 dates.  Paul Schinder

           Fixed a bug in UnixDate for years before 1000 AD.  Joaquin Ferrero

           Fixed a bug where "today" wasn't case insensitive.  Pedro Rodrigues

           Fixed a bug where business/approximate mode wasn't correctly used in DateCalc.  Mark
           T. Kennedy

           Bug in DateCalc where you couldn't pass undef as the errref.  Alex Howansky

           Bug where cygwin wasn't using the date command.  Rafael Kitover

       Time zone fixes
           New time zones.  Khairil Yusof, Andy Spiegel, Ernesto Rapetti

           New time zones.  Robin Norwood

           Fixed Russian time zones.  Yuri Kovalenko

       Language fixes
           Language fix for Danish.  Claus Rasmussen

           Language fix for German.  Andreas Dembach

       Documentation fixes
           Minor documentation improvement.  Caminati Carlo

           Lots of spelling fixes.  Asaf Bartov

VERSION 5.44 (2005-06-02)
       Released

VERSION 5.43 (DEVELOPMENT)
       (!) (*) Recurrences revisited
           The behavior of some elements of recurrences changed. These included making the week
           element (N) refer to the Nth occurrence of a day of the week in the week, month, or
           year. It is now possible to look at the 3rd Friday of every month for example.

           Y-0-WOY-DOW now refers to the WOY'th occurrence of DOW instead of the ISO 8601 date
           Y-W(WOY)-DOY. Also, changed Y-0-WOY-0 to refer to the WOY'th occurrence of FirstDay,
           and got rid of the MW and MD flags. Many other similar changes.

       (!) Changed %x format in UnixDate
           The %x format used to be equivalent to %D (%m/%d/%y), but it has been modified to use
           the DateFormat config variable, so it may return %d/%m/%y if a non-US DateFormat is
           specified.

       New features
           Added TodayIsMidnight.  Reuben Thomas

           Added "approx" mode to Delta_Format and reversed change to default Delta_Format
           behavior to the one from version 5.40.  Based on discussion with Adam Spiers.

           Added %O UnixDate format.  Martin Thurn

       Bug fixes
           Fixed a bug is ParseRecur where values passed in were no overriding old values in the
           recurrence.  Scott Barker (reported to the Debian bugs list).

           Fix for a potential problem in the "0000" time zone.  Ed Avis

           Changed taint check to be the one in perlsec(1).  Max Kalika

           Minor fix so DateInit("VAR=") will work.  Thomas Bohme

           Fixed a bug where business mode was kept operative even after the calculation was
           over.  Emiliano Bruni

           Minor change to run under cygwin.  Niel Markwick

           Minor VMS fix.  Martin P.J. Zinser

           Small fix to taint checking.  David Worenklein

           Fixed a problem where deltas were getting misinterpreted as dates.
            Harry Zhu

           Fixed a bug in ParseRecur where "last day of every March" couldn't be done.  Andras
           Karacsony

           Fixed a bug in business mode calculations.  Tracy L Sanders

           Sorted all events and dates returned by Events_List.  This fixes problems with tests
           on some versions of perl.  Tulan

           Modified %x UnixDate format to use DateFormat config variable.  Matt Lyons

       Time zone fixes
           Fixed a problem with single character military time zones (T and W) conflicting with
           ISO 8601 T and W dates.  Hugo Cornelis

           Small correction to Brazil time zones.  John McDonald

           Added time zones.  Michael Wood-Vasey, Don Robertson, Michael D. Setzer II, Andres
           Tarallo

       Language fixes
           Fixed German translations.  Oliver Scheit

           Minor corrections to Italian.  Nicola Pedrozzi

           Added the language Catalan.  Xavi Drudis

       Documentation fixes
           Minor doc fixes  Reuben Thomas, Ed Avis, Thomas Winzig

           Clarified documentation on %W/%G/%U/%L formats.  Joel Savignon

VERSION 5.42a 2003-07-03
       Test fixes
           A quick fix to replace a faulty test.

VERSION 5.42 (2003-07-02)
       Released
           Number changed to distinguish between the development release (5.41) and the official
           release.

VERSION 5.41 (DEVELOPMENT)
       As of 5.41, odd numbered releases are development (and appear only on my page). Even
       number releases are official releases submitted to CPAN.

       (!) Changed path separator for VMS
           Since ":" is used in some VMS paths, it should not have been used as the path
           separator.  It has been changed to a newline ("\n") character.

       (!) Delta_Format behavior changed
           The entire delta is exact if no month component is present (previously, no year or
           month component could be present).  Due to discussion with Tim Turner.

       Bug fixes
           Small patch for OpenVMS.  Martin P.J. Zinser

           Minor enhancement to ParseRecur.  Randy Harmon

           Fixed a bug involving business deltas with negative hours.  Ludovic Dubost

           Added some support for NetWare.  Chris Shields

           Applied some robustness patches.  Ed Avis

           Fixed a bug with years <1000.  Jonathan Callahan

           Patch to make Manip.pm -Mstrict clean and better VMS support.  Peter Prymmer

           Fixed a bug in "1st Saturday of 2005" format.  Maurice Aubrey

           Taint check insecure $ENV{PATH} fix.  Ed Avis

           Patch to allow deltas of the form "+ -1 day" to work.  Ed Avis

           Removed ampersands from function calls in documentation to fit new perl coding
           standards.  Bill Pollock

           Fixed a bug where spaces in a date caused problems in German (due to the number 1st,
           2nd, etc. being 1., 2., etc.).  Erik Roderwald

       Time zone fixes
           Minor bug fix where /etc/time zone not correctly read.  Jacek Nowacki

           Made the UnixDate %Z format work with numeric time zones.  Michael Isard

           Fixed bug where -HH:MM and +HH:MM were not being accepted as valid time zones.  Hank
           Barta

           Fixed a bug where time zones -HH:MM weren't handled in ISO 8601 dates.  Ed Avis

           Added some help for VMS time zones.  Don Slutz

           Added some checking to the time zone determination.  Ed Avis

           Added time zones.  David Coppit, Daniel Serodio, Fabian Mandelbaum, Raul Dias, Pedro
           Melo CUNHA, Roman Y Malakhov, David Whiting, Khaled Mostaguir, Jason King

       Language fixes
           (*) Replaced all non-ASCII characters with hex representations to avoid the malformed
           UTF-8 character warnings. Ed Avis

           Added Russian translation.  Dapi

           Additions to Dutch translation.  Willem

           Patch to French support.  Patrick Turmel

           Added Tues/Thur abbreviations. Martin Thurn

           Added Turkish. Giray

           Added Danish.  Jesper Dalberg
              A patch for Danish was send by Jorgen Norgaard previously, and
              I somehow overlooked it. I apologize for that.

       Test fixes
           Added runtests.bat contributed by Lon Amick

       Documentation fixes
           Minor doc fix.  Jeremy Tietsort

           Fixed spelling of Veteran's day.  Dirk Eddelbuettel

           Documentation improvements.  James Olsen

VERSION 5.40 (2001-06-07)
       New features
           Added support for negative values is "epoch SECS" type dates.  Larry Warner

           Added NWD/PWD/DWD flags to ParseRecur.  Peter Wyngaard

       Bug fixes
           Fixed a warning.  Edward Avis

           Fixed a bug where the date wasn't rolling over when parsing dates containing only
           times.  James L. Gordon

           Fixed a bug where some times were defaulting to the current time instead of 00:00:00.
           Edward Avis

           Fixed a bug in Date_NthDayOfYear with decimal days.  Olga Polyakov

           Fixed a bug where ParseDateDelta returned a delta if nothing was passed in.  Jim
           Hranicky

           Fixed a bug where noon was case sensitive.  Bion Pohl

           Fixed a bug where dateTtime wasn't parsed.  Jeremy Brinkley

           Fixed a bug in holiday parsing involving recurrences.  Jerry Wilcox

           Fixed a bug where an invalid date passed to Date_IsWorkDay produced an error message.
           Mark Rejhon

           Fixed a bug where EraseHolidays wasn't taking affect correctly.  Chateauvieux Martial

           Fixed a bug where the list produced by Date_Init couldn't be passed back in to
           Date_Init.  James Elson

       Time zone fixes
           Added `date +%Z` support in Date_TimeZone.  Mike Bristow

           Fixed a warning if the time zone is supplied as a +HHMM format.  Viola Mauro

           Fixed South African time zone.  David Sieborger

       Documentation fixes
           Added an example.  Philip Jones

VERSION 5.39 (2000-06-27)
       Bug fixes
           `date` uses the user's path unless taint checking is on.

           @::DatePath used instead of @Date::Manip::DatePath incorrectly.  Fixed by John
           Labovitz.

           Fixed a bug where times such as "5 seconds ago" were not changing over time.  Matthew
           R. Sheahan

       Time zone fixes
           Added /etc/time zone support to &Date_TimeZone.  Dirk Eddelbuettel

           Added time zones. Dirk Eddelbuettel, Eli Selinger

VERSION 5.38 (2000-05-23)
       (*) Added Events
           Added Events section to config file and Events_List routine.  Prompted by Greg
           Schiedler and paid for by Alan Cezar.

       (!) Removed Date_DaysSince999
           The Date_DaysSince999 function (deprecated in 5.35) has been removed.

       New features
           Added support for ISO8601 dates of the format dateTtime.  Jason Pierce

           Got rid of the "use Cwd" and ENV{PATH} lines which means no more taint problems.

       Bug fixes
           Fixed "dofw" format to return the day of the current week as documented instead of
           next week.  Dennis Ingram

           Fixed a bug where dates in years 1900, 1800, etc. (but not 2000 or other 400th years)
           were off by one day in DayOfWeek.  Noble Thomas

           Fixed a bug in ParseRecur (2-digit years not treated correctly).  Brian Rectanus

       Time zone fixes
           Added time zones.  Nelson Ferreira, David Harper

       Documentation fixes
           Fixed some typos.  Thanks to Alex Kapranoff

           Typo fixed.  Jim Hranicky

VERSION 5.37 (2000-02-14)
       Bug fixes
           Set ENV{PATH} to help with taint checking.  Joe Lipson

           Fixed a serious bug where HH:24:00 was broken due to support from 24:00:00.  Scott
           Egashira

       Time zone fixes
           Fixed the sign on the military time zones.  John Scott

VERSION 5.36 (2000-01-21)
       New features
           Added support for 24:00:00 to ParseDate.  William H Asquith

       Bug fixes
           Fixed a bug in ParseRecur. Lewis Tsao

           Fixed a bug is UnixDate (%l format).  Jon Hedley

           Fixed a bug in Date_GetNext/Prev.  Christoph Haas

           Fixed a bug in Date_IsHoliday.  Report and patch by Rolf Beutner

           Fixed a bug in UnixDate.  Patch by Kurtis D. Rader

           Rewrote IsInt routine based on discussion with Sean Hunter (approximately 30% faster
           on a SPARC).

       Time zone fixes
           Added time zone.  Paul Arzul

       Documentation fixes
           Fixed a documentation problem with Date_ConvTZ.  Diab Jerius

VERSION 5.35 (1999-07-06)
       (!) Deprecated Date_DaysSince999
           In fixing support for the years 0001-0999, I rewrote Date_DaysSince999 to be
           Date_DaysSince1BC.  The Date_DaysSince999 function will be removed.

       (*) (!) Added PathSep variable
           In order to better support Win32 platforms, I added the PathSep config variable.  This
           will allow the use of paths such as "c:\date" on Win32 platforms.  Old config files on
           Win32 platforms (which were not working correctly in many cases) may not work if they
           contain path information to the personal config file.

       (*) Recurrences now support flags
           Flags for modifying recurrence dates are now supported.

       (*) Improved holiday support considerably
           Added support for recurrences and one-year-only holidays (the latter requested first
           by Vishal Bhatia.

       (*) Date_Init improved
           Date_Init can now return a list of config variables if called in array context.  Based
           on a suggestion by Matt Tuttle.

       New features
           Modified Date_GetPrev/Date_GetNext to take $curr=2.

           Now parses the Apache log file format "dd/mmm/yyyy:hh:mm:ss (time zone)".  Mark
           Ferguson

           Added OS/2 support.  Michael B. Babakov

           Added Date_IsHoliday routine.  Joe Pepin

           Added recurrence support for Easter (first suggested by Abigail).

       Bug fixes
           Made "epoch" not case sensitive and fixed a bug where it would fail in some languages.
           Caught because of Iosif's thorough Romanian test file.

           Fixed a problem where "in 5 days/weeks/months" sometimes wouldn't get correctly parsed
           in other languages.  Caught because of Iosif's thorough Romanian test file.

           Fixed a weakness in ParseDateDelta brought out by the Romanian delta test file.

           Fixed a bug causing warnings in the beta version of perl.  Patch by Paul Johnson.

           Fixed support for years 0000-0999.  Requested by Chris Vaughan

           Several recurrence bug fixes.

           Put all the my'ed global variables in a couple hashes to clean up the namespace and to
           make a few future enhancements easier to do.

           Fixed a bug where business weeks weren't being used correctly.  Qian Miao

           Fixed a serious typo in the DaysSince1BC routine.  Qian Miao

           Fixed Veteran's day, added Good Friday (off by default).  Peter Chen

           Cleaned up holiday variables and re-did holiday routines.

       Time zone fixes
           Added time zones.  Oded Cohen

       Language fixes
           Added Romanian support (including 2 test files).  Iosif Fettich

           Corrected Swedish translations.  Danne Solli

           Some fixes to German translations.  Peter Ehrenberg

           Added Italian.  Nicola Pedrozzi

       Test fixes
           Added recurrence test suite

       Documentation fixes
           Several documentation updates.

           New recurrence documentation.

VERSION 5.34 (1999-04-13)
       (!) (*) All Date::Manip variables are no longer accessible
           Previously, Date::Manip variables were declared using a full package name.  Now, they
           are declared with the my() function.  This means that internal variables are no longer
           accessible outside of the module.  Based on suggestion by Tom Christiansen

       (!) Week interpretation in business mode deltas
           A business mode delta containing a week value used to be treated as 7 days.  A much
           more likely interpretation of a week is Monday to Monday, regardless of holidays, so
           this is now the behavior.

       (!) %z UnixDate format
           The %z UnixDate format used to return the time zone abbreviation.  It now returns it
           as a GMT offset (i.e. -0500).  %Z still returns the time zone abbreviation.  Suggested
           by Tuc.

       (!) Formats "22nd Sunday" returns the intuitive value
           The date "22nd Sunday" used to return the Sunday of the 22nd week of the year (which
           could be the 21st, 22nd, or 23rd Sunday of the year depending on how weeks were
           defined).  Now, it returns the 22nd Sunday of the year regardless.

       (!) Separator in DD/YYmmm and mmmDD/YY formats no longer optional
           Previously, the date "Dec1065" would return Dec 10, 1965.  After adding the YYYYmmm
           and mmmYYYY formats, this was no longer possible.  The separator between DD and YY is
           no longer optional, so

              Dec1065     returns December 1, 1065
              Dec10/65    returns December 10, 1965

       (*) Date_Cmp added
           In one of the next versions of Date::Manip, the internal format of the date will
           change to include time zone information.  All date comparisons should be made using
           Date_Cmp (which currently does nothing more than call the Perl "cmp" command, but
           which will important when comparing dates that include the time zone).

           Added now in response to a question by Al Sorrell (I should have added it earlier).

       New features
           Added exact business mode.  Ian Duplisse

           Added "mmmYYYY" and "YYYYmmm" formats.  As a result, "DDYYmmm" and "mmmDDYY" formats
           changed to "DD/YYmmm" and "mmmDD/YY" as described above.  David Twomey

       Bug fixes
           Fixed a bug where a date passed in as an array wasn't getting the date removed from
           the array.  Rick Wise

           Added tests for MPE/iX OS.  John Testa

           Fixed a bug where WorkDayBeg=8:00 went into an infinite loop.  Mark Martinec

           Changed a business week to be the same as an exact week.  Abigail

           Fixed a bug where "Sunday week 0" didn't work (only affected week 0) Gerald Rinske

           Minor bug (my variable declared twice).  Paul J. Schinder

           Fixed a bug where "epoch SECONDS" was getting parsed wrong (for SECONDS which could be
           interpreted as an ISO-8601 date).  N. Thomas

           Fixed a problem where init files were not being read.  Mike Reetz

       Time zone fixes
           At the request of the UN, I added the SAT time zone.  :-) Howard Hendler

           Fixed a bug where time zones were converted multiple times if ConvTZ was set and
           DateCalc called.  Steven Hartland

       Language fixes
           Added Portuguese.  Rui Pedro da Silva Leite Pereira

       Documentation fixes
           A number of typos fixed.  Ron Pero

VERSION 5.33 (1998-08-20)
       Bug fixes
           Fixed a bug where "1 month ago" was no longer working (and added it to the test
           cases).  This broke when I fixed the "-1second" bug in the previous version.  A result
           of this is that a number of "deltas" can be parsed as dates (i.e. &ParseDate("1 hour
           20 minutes ago") is equivalent to &DateCalc("now","1 hour 20 minutes ago")).  Only
           text deltas can be used in this way (i.e. &ParseDate("-0:0:0:0:1:20:0") will not
           work).

       Language fixes
           Added Spanish support.  Bautista Jasso Javier

VERSION 5.32 (1998-08-17)
       (!) Date_Init arguments
           The old style Date_Init arguments that were deprecated in version 5.07 have been
           removed.

       (!) (*) DateManip.cnf change
           Changed .DateManip.cnf to Manip.cnf (to get rid of problems on OS's that insist on 8.3
           filenames) for all non-Unix platforms (Windows, VMS, Mac).  For all Unix platforms,
           it's still .DateManip.cnf .  It will only look in the user's home directory on VMS and
           Unix.

       New features
           Added "in N days" and "N days ago" formats.  Tony Bowden.

           Added cYYYY format to YYtoYYYY variable.  Mark Rejhon.

           Added 2 days/weeks/months later in both ParseDate and ParseDelta (for Dutch support).
           Abigail.

           Added "Y:M:0*-DOM:0:0:0" to ParseRecur.  Jeff Yoak.

       Bug fixes
           Fixed a bug where the deltas could be off by up to a couple minutes in some rare
           cases.  Herman Horsten.

           Fixed an "uninitialized symbol" warning.  Mark D. Anderson.

           Fixed a bug where holidays weren't erased.  Jonathan Wright.

           Applied a bug fix from Joe Chapman where the %W/%U UnixDate formats were frequently
           wrong.

           Several minor fixes and improvements.  Abigail.

           Added some VMS support.  Charles Lane.

           Fixed a bug which caused a test to fail on some systems.  Charles Lane.

           Fixed a bug where "-1second" was treated as a date rather than a delta in DateCalc.
           Kenneth Ingham

           Added a bit to the Makefile.PL (as it was distributed in the Win32 Perl Resource Kit).
           Murray Nesbitt

       Time zone fixes
           Allowed time zones of the format STD-#DST-#.  Peter Gordon.

           Added time zone support for "+0500 (EST)".  Tom Christiansen.

           Restricted time zones parsing to 0000-2359 instead of 0000-9999.  Frank Cusack

           Added time zones.  W. Phillip Moore, Michael Smith, Samuli Karkkainen

       Language fixes
           Added Polish support.  Ian Wojtowicz.

           Added Dutch support.  Abigail.

           Added A.M. and P.M. parsing (not just AM and PM).  William W. Arnold.

           Fixed a German initialization problem.  Thomas Horster-Moller and Christian Reithmaier

       Documentation fixes
           Documentation fix.  Peter Gordon.

           Minor documentation changes.  Yamamoto Hiroshi.

           Added info about the RCS problem.  Supplied by Kipp E. Howard.

VERSION 5.31 (1998-04-08)
       New features
           Added "epoch SECS" format to ParseDateString.  Thanks to: Joshua M. Burgin.

           Added a patch by Blair Zajac to make Date_NthDayOfYear work with decimal days.

       Bug fixes
           Fixed a bug in ParseDateDelta (seems to appear only in 5.005 pre-releases).  Found by
           Larry W. Virden.

           Missed one form in ParseDate.  Noted by Tuc.

           Fixed a bug where "15:00:00" couldn't be parsed.  Michael Pizolato.

           Split Manip.pm.  New files are HISTORY, TODO, Manip.pod.

           Fixed a bug in ParseDateDelta.  Antonio Rosella.

           Removed the only occurrence of $& (which may speed some things up).  Fix by Ken
           Williams.  First suggested by Abigail.

           Fixed an overflow bug in doing date calculations with 2 dates more than 70 years
           apart.  Fix by Vishal Bhatia.

           Fixed a bug where "5:00pm" wasn't always parsed correctly.  Thanks to Jim Trocki.

           Fixed a bug in UnixDate (it wouldn't return the correct string for a format who's last
           character was '0') noted by Ramin V.

       Time zone fixes
           Relaxed some restrictions on time zones so ISO-8601 dates can use non-ISO-8601 time
           zones.  Noted by John Chambers.

           Fixed a bug in converting time zones with a minutes field (+1030).  Found by Paul O.

       Language fixes
           Some fixes to the French translations by Emmanuel Bataille.

           Added German support.  Thanks to Andreas C. Poszvek.

       Documentation fixes
           Minor documentation fixes.  Will Linden.

           Fixed a documentation problem with Date_GetPrev.  It was still 0-6 instead of 1-7.
           Thanks to Robert Klep.

VERSION 5.30 (1998-01-21)
       (!) (*) Delta format changed
           A week field has been added to the internal format of the delta.  It now reads
           "Y:M:W:D:H:MN:S" instead of "Y:M:D:H:MN:S".

       (*) Now handles recurring events
           Added ParseRecur.  First suggested by Chris Jackson.

       New features
           All routines can now take either a 2- or 4-digit year.

           Added Delta_Format.  First suggested by Alan Burlison.

           Added Date_SetDateField.  Thanks to Martin Thurn.

       Bug fixes
           Made the $err argument to DateCalc optional.

           Changed the name of several of the library routines (not the callable ones) to
           standardize naming.

VERSION 5.21 (1998-01-15)
       (!) Long running processes may give incorrect time zone
           A process that runs during a time zone change (Daylight Saving Time specifically) may
           report the wrong time zone.  See the UpdateCurrTZ variable for more information.

       (!) UnixDate "%J", "%W", and "%U" formats fixed
           The %J, %W, and %U will no longer report a week 0 or a week 53 if it should really be
           week 1 of the following year.  They now report the correct week number according to
           ISO 8601.

       New features
           Added YYtoYYYY variable.  Suggested by Michel van der List.

           Added the UpdateCurrTZ variable to increase speed at the cost of being wrong on the
           time zone.

           Added British date formats.  Thanks to Piran Montford.
              Monday week
              today week
              as well as some US formats
              in 2 months
              next month

           Time can now be written 5pm.  Piran Montford.

           Added the TomorrowFirst variable and Date_NearestWorkDay function.

           Added UnixDate formats %G and %L to correctly handle the year.  Thanks to Samuli
           Karkkainen.

           Added ForceDate variable. Based on a suggestion by Christian Campbell.

       Bug fixes
           Now passes Taint checks.  Thanks to Mike Fuhr, Ron E. Nelson, and Jason L Tibbitts
           III.

           Put everything in a "use integer" pragma.

           Added a missing space in the %g UnixDate format.  Thanks to Mike Booth.

           Removed all mandatory call to Date_Init (only called when current time is required).
           Significantly faster.

           Fixed a bug in Date_ConvTZ.  Thanks to Patrick K Malone.

           Fixed a bug in Date_IsWorkDay.

       Time zone fixes
           Fixed some Australian time zones.  Kim Davies.

       Language fixes
           Cleaned up multi-lingual initialization and added the IntCharSet variable.

           Improved French translations.  Thanks to Emmanuel Bataille.

           Added "Sept" as a recognized abbreviation.  Thanks to Martin Thurn.

           Typo in the French initialization.  Thanks to Michel Minsoul.

       Test fixes
           Fixed the tests to not fail in 1998.

       Documentation fixes
           Documented how to get around Micro$oft problem.  Based on a mail by Patrick Stepp.

VERSION 5.20 (1997-10-12)
       (*) ISO 8601 support
           ISO 8601 dates are now parsed. This resulted in several other changes specified below.

       (!) (*) ParseDate formats removed
           As a result of ISO 8601 support, some formats which previously worked may no longer be
           parsed since they conflict with an ISO 8601 format.  These include MM-DD-YY (conflicts
           with YY-MM-DD) and YYMMDD (conflicts with YYYYMM).  MM/DD/YY still works, so the first
           form can be kept easily by changing "-" to "/".  YYMMDD can be changed to YY-MM-DD
           before being parsed.  Whenever parsing dates using dashes as separators, they will be
           treated as ISO 8601 dates.  You can get around this by converting all dashes to
           slashes.

       (!) (*) Week day numbering
           The day numbering was changed from 0-6 (Sun-Sat) to 1-7 (Mon-Sun) to be ISO 8601
           compatible.  Weeks start on Monday (though this can be overridden using the FirstDay
           config variable) and the 1st week of the year contains Jan 4 (though it can be forced
           to contain Jan 1 with the Jan1Week1 config variable).

       New features
           Several new parsing formats added, including:
              "Friday"             suggested by Rob Perelman
              "12th"               suggested by Rob Perelman
              "last day of MONTH"  suggested by Chadd Westhoff

           Added ParseDateString for speed (and simplicity for modifying ParseDate)

           Added %J and %K formats to UnixDate.

           Added Date_DaysInMonth.

       Bug fixes
           Reorganized ParseDate more efficiently.

           Fixed some incorrect uses of $in instead of $future in ParseDate.  Thanks to Erik
           Corry.

           Added some speedups (more to come).

       Test fixes
           Cleaned up testing mechanism a bit and added tests for ISO 8601 formats.

VERSION 5.11 (1997-08-07)
       Version 5.11 was never released to CPAN.

       Bug fixes
           Added one more check for NT perl.  Thanks to Rodney Haywood.

           Added some comments to help me keep my personal libraries up-to-date with respect to
           Date::Manip and vice-versa.

           Fixed a bug which showed up in French dates (though it could happen in other languages
           as well).  Thanks to Georges Martin.

           Fixed a bug in DateCalc.  Thanks to Thomas Winzig.

           Removed the "eval" statement from CheckFilePath which causes a suid c wrapper program
           to die when it calls a Date::Manip script.  Thanks to Hank Hughes.

           Fixed a bug in business mode calculations.  Thanks to Sterling Swartwout.

           Fixed a bug in which "1997023100:00:00" was accepted as valid.  Thanks to Doug
           Emerald.

           Fixed a bug in which ConvTZ was not used correctly in ParseDate.  Re-did portions of
           Date_ConvTZ.  Thanks to Vivek Khera.

           Fixed a bug in business mode calculations.  Thanks to Ian Duplisse.

           Added $^X check for Win95 perl.  Thanks to Walter Soldierer.

           Missed one call to NormalizeDelta so the output was wrong.  Thanks to Brad A. Buikema.

       Time zone fixes
           Added time zones.  Paul Gillingwater, Rosella Antonio, Kang Taewook

VERSION 5.10 (1997-03-19)
       Bug fixes
           Cleaned up In, At, and On regexps.

           Added 2 checks for MSWin32 (date command and getpw* didn't work).  Thanks to Alan
           Humphrey.

           Fixed two bugs in the DateCalc routines.  Pointed out by Kevin Baker.

           Added a check for Windows_95.  Thanks to Charlie W.

           Cleaned up checks for MacOS and Microsoft OS's.  Hopefully I'm catching everything.
           Thanks to Charlie Wu for one more check.

           Fixed a typo which broke Time%Date (Date=dd%mmm%yy) format.  Thanks to Timothy
           Kimball.

       Time zone fixes
           Fixed some problems with how "US/Eastern" type time zones were used.  Thanks to Marvin
           Solomon.

       Test fixes
           Tests will now run regardless of the time zone you are in.

           Test will always read the DateManip.cnf file in t/ now.

           A failed test will now give slightly more information.

           DateManip.cnf file in t/ now sets ALL options to override any changes made in the
           Manip.pm file.

       Documentation fixes
           Added documentation for backwards incompatibilities to POD.

           Fixed some problems in POD documentation.  Thanks to Marvin Solomon.

           Fixed minor POD error pointed out by John Perkins.

           Changed documentation for Date_IsWorkDay (it was quite confusing using a variable
           named $time).  Thanks to Erik M. Schwartz.

           Fixed typo in documentation (midnight misspelled).  Thanks to Timothy Kimball.

VERSION 5.09 (1997-01-28)
       Bug fixes
           Upgraded to 5.003_23 and fixed one problem associated with it.

           Used carp and changed all die's to confess.

           Replaced some UNIX commands with perl equivalents (date with localtime in the tests,
           pwd with cwd in the path routines).

           Cleaned up all routines working with the path.

       Test fixes
           Tests work again (broke in 5.08).  Thanks to Alex Lewin and Michael Fuhr for running
           debugging tests.

VERSION 5.08 (1997-01-24)
       Bug fixes
           (*) Fixed serious bug in ConvTZ pointed out by David Hall.

           (*) Modified Date_ConvTZ (and documented it).

VERSION 5.07p2  1997-01-03
       Released two patches for 5.07.

       Bug fixes
           Fixed a bug where a delta component of "-0" would mess things up.  Reported by Nigel
           Chapman.

       Time zone fixes
           (*) Can now understand PST8PDT type zones (but only in Date_TimeZone).

           Added lots of time zone abbreviations.

       Test fixes
           Fixed some tests (good for another year).

VERSION 5.07 (1996-12-10)
       (!) UnixDate "%s" format
           Used to return the number of seconds since 1/1/1970 in the current time zone.  It now
           returns the number of seconds since 1/1/1970 GMT.  The "%o" format was added which
           returns what "%s" previously did.

       (!) (*) Internal format of delta
           The format for the deltas returned by ParseDateDelta changed.  Previously, each
           element of a delta had a sign attached to it (+1:+2:+3:+4:+5:+6).  The new format
           removes all unnecessary signs by default (+1:2:3:4:5:6).  Also, because of the way
           deltas are normalized (see documentation on ParseDateDelta), at most two signs are
           included.  For backwards compatibility, the config variable DeltaSigns was added.  If
           set to 1, all deltas include all 6 signs.

       (!) (*) Date_Init arguments
           The format of the Date_Init calling arguments changed.  The old method

              Date_Init($language,$format,$tz,$convtz);

           is still supported , but this support will likely disappear in the future.  Use the
           new calling format instead:

              Date_Init("var=val","var=val",...);

           NOTE:  The old format is no longer supported as of version 5.32 .

       (*) Added weeks to ParseDateDelta.
           Suggested by Mike Bassman.  Note that since this is a late addition, I did not change
           the internal format of a delta.  Instead, it is added to the days field.

       (*) Now reads a config file.
           Refer to the Date_Init documentation for details.

       (*) Added business mode.
           See documentation.  Suggested by Mike Bassman.

       New features
           (*) Modified how deltas are normalized and added the DeltaSigns config variable.

           Added %q format "YYYYMMDDHHMMSS" to UnixDate.  Requested by Rob Perelman.  Also added
           %P format "YYYYMMDDHH:MM:SS".

           Added a new config variable to allow you to work with multiple internal formats (with
           and without colons).  Requested by Rob Perelman.  See Date_Init documentation.

           Added the following formats suggested by Andreas Johansson:
              Sunday week 22 [in 1996] [at 12:00]
              22nd Sunday [in 1996] [at 12:00]
              Sunday 22nd week [in 1996] [at 12:00]

           Added a new config variable to allow you to define the first day of the week.  See
           Date_Init documentation.

           Added the following formats to ParseDate for convenience (some were suggested by Mike
           Bassman):
              next/last Friday [at time]
              next/last week [at time]
              in 2 weeks [at time]
              2 weeks ago [at time]
              Friday in 2 weeks
              in 2 weeks on Friday
              Friday 2 weeks ago
              2 weeks ago Friday

           Added Date_SecsSince1970GMT, moved the %s format to %o (secs since 1/1/70) and added
           %s format (secs since 1/1/70 GMT).  Based on suggestions by Mark Osbourne.  Note this
           introduces a minor backward incompatibility described above.

           Date_SetTime now works with international time separators.

           Added the %g format (%a, %d %b %Y %H:%M:%S %z) for an RFC 1123 date.  Suggested by Are
           Bryne.

           Added options to delete existing holidays and ignore global config file.

           Date_GetNext and Date_GetPrev now return the next/prev occurrence of a time as well as
           a day.  Suggested by Are Bryne.

           In approximate mode, deltas now come out completely normalized (only 1 sign).
           Suggested by Rob Perelman.

           Added Date::Manip::InitDone so initialization isn't duplicated.

           Added a 3rd internal format to store YYYY-MM-DD HH:MN:SS (iso 8601).

           Added a config variable to allow you to work with 24 hour business days.  Suggested by
           Mike Bassman.

           ParseDateDelta now returns "" rather than "+0:0:0:0:0:0" when there is an error.

       Bug fixes
           (*) The d:h:mn:s of ALL deltas are normalized.

           Huge number of code changes to clean things up.

           Subroutines now check to see if 4 digit years are entered.  Suggested by Are Bryne.

           Added local($_) to all routines which use $_.  Suggested by Rob Perelman.

           Complete rewrite of DateCalc.

           Fixed a bug where UnixDate %E format didn't work with single digit dates.  Patch
           supplied by Jyrgen Nyrgaard.

           Fixed a bug where "today" was not converted to the correct time zone.

       Time zone fixes
           Fixed bug in Date_TimeZone where it didn't recognize +HHMN type time zones.  Thanks to
           Are Bryne.

           Added WindowsNT check to Date_TimeZone to get around NT's weird date command.  Thanks
           to Are Bryne.

           Fixed typo (CSD instead of CST).

           Fixed sign in military time zones making Date::Manip RFC 1123 compliant (except that
           time zone information is not stored in any format)

       Test fixes
           (*) Added test suite!

VERSION 5.06 (1996-10-25)
       New features
           Added "today at time" formats.

           ParseDateDelta now normalizes the delta as well as DateCalc.

           Added %Q format "YYYYMMDD" to UnixDate.  Requested by Rob Perelman.

       Bug fixes
           Fixed another two places where a variable was declared twice using my (thanks to Ric
           Steinberger).

           Fixed a bug where fractional seconds weren't parsed correctly.

           Fixed a bug where "noon" and other special times were not parsed in the "which day of
           month" formats.

           Fixed a minor bug where a few matches were case sensitive.

           The command "date +%Z" doesn't work on SunOS machines (and perhaps others) so 5.05 is
           effectively broken.  5.06 released to fix this.  Reported by Rob Perelman.

VERSION 5.05 (1996-10-11)
       New features
           Changed deltas to be all positive or all negative when produced by DateCalc.
           Suggested by Steve Braun

           Added DateManipVersion routine.

           (*) Parses RFC 822 dates (thanks to J.B. Nicholson-Owens for suggestion).

           Parses ctime() date formats (suggested by Matthew R. Sheahan).

           Now supports times like "noon" and "midnight".

       Bug fixes
           Fixed bug introduced in 5.04 when default day set to 1.  When no date given, have day
           default to today rather than 1.  It only defaults to one if a partial date is given.

           Fixed bug where Date_DaysSince999 returned the wrong value (the error did not affect
           any other functions in Date::Manip due to the way it was called and the nature of the
           error).  Pointed out by Jason Baker

           Dates with commas in them are now read properly.

           Fixed two places where a variable was declared twice using my (thanks to Ric
           Steinberger).

           Hopefully fixed installation problems.

           Got rid of the last (I think) couple of US specific strings.

           Fixed bug in Date_SetTime (didn't work with $hr,$min,$sec < 10).

           Added ModuloAddition routine and simplified DateCalc.

       Time zone fixes
           (*) Now supports time zones.

           (*) Added Date_ConvTZ routine for time zone support.

           Date_TimeZone will now also check `date '+%Z'` suggested by Aharon Schkolnik.

       Language fixes
           Added Swedish translation (thanks to Andreas Johansson

           The time separators are now language specific so the French can write "10h30" and the
           Swedes can write "10.30".  Suggested by Andreas Johansson.

       Documentation fixes
           Fixed bad mistake in documentation (use Date::Manip instead of use DateManip) pointed
           out by tuc AT valhalla.com

           Minor improvements to documentation.

           Documented the 'sort within a sort' bug.

           Fixed type in documentation/README pointed out by James K. Bence.

VERSION 5.04 (1996-08-01)
       New features
           Added support for fractional seconds (as generated by Sybase).  They are parsed and
           ignored.  Added by Kurt Stephens

       Bug fixes
           Fixed bugs reported by J.B. Nicholson-Owens
              "Tue Jun 25 1996" wasn't parsed correctly (regexp was case
                 sensitive)
              full day names not parsed correctly
              the default day in ErrorCheck should be 1, NOT currd since when
              currd>28, it may not be a valid date for the month

VERSION 5.03 (1996-07-17)
       Bug fixes
           Fixed a couple of bugs in UnixDate.

           Declared package variables to avoid warning "Identifier XXX used only once".  Thanks
           to Peter Bray for the suggestion.

VERSION 5.02 (1996-07-15)
       New features
           (*) Added some internationalization (most of the routines had to be modified at least
           slightly)

       Bug fixes
           Fixed a bug where repeated calls to ParseDate("today") was not reset

           Replaced the %Date::Manip::Date variable with a large number of other, more flexible
           variables

           Rewrote the Init routine

VERSION 5.01 (1996-06-24)
       New features
           Added %F format to UnixDate. Rob Perelman

           Added "Date at Time" types

           Weekdays can be entered and checked

           Two digit years fall in the range CurrYear-89 to CurrYear+10

       Bug fixes
           Reworked a number of the ParseDate regular expressions to make them more flexible

       Documentation fixes
           Fixed a typo (Friday misspelled Fridat). Rob Perelman

           Documentation problem for \$err in DateCalc. Rob Perelman

VERSION 5.00 (1996-06-21)
       (*) Switched to a package.
           Patch supplied by Peter Bray:
              renamed to Date::Manip
              changed version number to 2 decimal places
              added POD documentation

           Thanks to Peter Bray, Randal Schwartz, Andreas Koenig for suggestions

       Bug fixes
           Fixed a bug pointed out by Peter Bray where it was complaining of an uninitialized
           variable.

VERSION 4.3 (1995-10-26)
       New features
           Added "which dofw in mmm" formats to ParseDate.  Mark Dedlow

       Bug fixes
           Added a bugfix of Adam Nevins where "12:xx pm" used to be parsed "24:xx:00".

VERSION 4.2 (1995-10-23)
       New features
           UnixDate will now return a scalar or list depending on context

           ParseDate/ParseDateDelta will now take a scalar, a reference to a scalar, or a
           reference to an array

           (*) Simple time zone handling

           (*) Added Date_SetTime, Date_GetPrev, Date_GetNext

       Bug fixes
           Added copyright notice (requested by Tim Bunce)

VERSION 4.1 (1995-10-18)
       New features
           (*) Added DateCalc

       Bug fixes
           Changed %DATE_ to %DateManip::Date

           (*) Rewrote ParseDateDelta

VERSION 4.0 (1995-08-13)
       (*) First public release

       New features
           Added time first formats to ParseDate

       Bug fixes
           (*) Switched to perl 5

           Cleaned up ParseDate, ParseDateDelta

VERSION 3.0 (1995-05-03)
       New features
           Added today/tomorrows/etc. formats

           (*) Added UnixDate

           (*) Added ParseDateDelta

       Bug fixes
           Added %DATE_ global variable to clean some stuff up

           Simplified several routines

VERSION 2.0 (1995-04-17)
       New features
           Included ideas from Time::ParseDate (David Muir Sharnoff)

           Included ideas from date.pl 3.2 (Terry McGonigal)

           (*) Added seconds to ParseDate

       Bug fixes
           Made error checking much nicer

VERSION 1.2 (1995-03-31)
       New features
           Added a few date formats

       Bug fixes
           Made months case insensitive

VERSION 1.1 (1995-02-08)
       New features
           Added leap year checking

           Both "Feb" and "February" formats available

VERSION 1.0 (1995-01-20)
       (*) Initial release
           Though not released to the public, the initial released combined routines from several
           scripts into one library.

BUGS AND QUESTIONS
       Please refer to the Date::Manip::Problems documentation for information on submitting bug
       reports or questions to the author.

SEE ALSO
       Date::Manip       - main module documentation

LICENSE
       This script is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.

AUTHOR
       Sullivan Beck (sbeck AT cpan.org)

perl v5.32.1                                2021-11-20                 Date::Manip::Changes5(3pm)

Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-13 02:26 @3.142.98.115 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
Valid XHTML 1.0!Valid CSS!