On Apache
Under GNU General Public License
2024-12-13 02:49 @18.119.140.103 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
Date::Manip::Interfaces(3pm) User Contributed Perl Documentation Date::Manip::Interfaces(3pm)
NAME
Date::Manip::Interfaces - A description of functional and OO interfaces
DESCRIPTION
There are three different ways to use Date::Manip . A complete description of each is
included below. They are:
Functional interface (version 5)
Date::Manip version 5 runs on very old versions of perl. If you need to use
Date::Manip with a version of perl older than 5.10, this is the only interface
available.
Functional interface (version 6)
When Date::Manip was rewritten (version 6), it made use of some features of perl 5.10
. This is the recommended interface if you are supporting a script that uses the
functional interface, but where a newer version of perl is available.
Object-oriented interface
The OO interface is the recommended interface wherever possible. It is the only one
with access to the full functionality of the module.
VERSION 5 AND VERSION 6
Date::Manip version 5.xx was available for many years, but suffered from several
weaknesses. It was slow, and did not handle timezones or daylight saving time correctly.
It was written as a functional interface, even though an object-oriented interface would
have been better. It did have the advantage of running on very old versions of perl (it
is known to work on perl 5.6 and may work on even older versions of perl).
Date::Manip version 6.00 was a complete rewrite of the module. For detailed information
about the differences, please refer to the Date::Manip::Changes5to6 document. The rewrite
was needed in order to handle timezone operations, in addition to many other improvements
including much better performance and more robust parsing.
The rewrite made use of features introduced in perl 5.10 which made the date parsing
routines significantly cleaner. In addition, the 6.xx release was written as an object
oriented set of modules which are much more powerful than the older functional interface.
For backward compatibility, a new functional interface was rewritten (which is simply a
set of wrapper functions which call the OO methods) which is almost entirely backward
compatible with the version 5.xx interface.
The Date::Manip distribution includes all three of these interfaces: the older version 5
interface, and both the new OO interface and the backward compatible functional interface.
Also, all three are installed, so you can use whichever interface is appropriate.
Since there are three different interfaces available, choosing the interface is the
necessary.
If you are running on a system with a very old version of perl (older than 5.10), the
version 5 interface is your only option.
If you are on a system running a newer version of perl, but need to support a script that
was written using the functional interface, then you can use the version 6 functional
interface.
For everyone else, it is strongly recommended that you use the object-oriented interface.
A more detailed description of each interface is included below. If you already know
which interface you want to use, just go to the "SEE ALSO" in Date::Manip section for
documentation for each interface.
FUNCTIONAL INTERFACE (VERSION 5)
When using a version of perl older than 5.10, this is the only interface available. This
interface is documented in the Date::Manip::DM5 document. This interface has several
weaknesses that need to be understood when using it:
Limited Support
The version 5 functional interface is no longer being developed, and only limited
support is available for it.
As of December 2012, no development will be done, and I will not correct any remaining
bugs in version 5. If a patch is supplied by someone else to fix bugs, I will apply
it, provided it applies cleanly, and the resulting code continues to pass all tests.
I will not apply patches to add features.
I will continue to distribute version 5 for several years. I do not have a date in
mind where version 5 will be removed.
Limited Time Zone Support
Time zone support is extremely limited, and is often incorrect. The lack of time zone
support was the primary reason for rewriting Date::Manip.
The version 5 interface does not handle daylight saving time changes correctly.
Performance Issues
Considerable time has been spent speeding up Date::Manip, and fairly simple benchmarks
show that version 6 is around twice as fast as version 5.
Feel free to email me concerns and comments.
FUNCTIONAL INTERFACE (VERSION 6)
The version 6 functional interface is almost completely identical to the version 5
functional interface, except that it uses the object-oriented modules to do all the real
work.
Time zone support is greatly improved, but is still somewhat limited. Since the version 6
interface is backward compatible, dates do not store time zone information in them, so the
programmer is responsible for keeping track of what time zone each date is in. If you want
full access to the time zone support offered in Date::Manip, you have to use the object-
oriented interface.
For the most part, scripts written for older versions of Date::Manip will continue to work
(and scripts written for the version 6 functional interface will run with the version 5
interface), however in a few cases, you may need to modify your scripts. Please refer to
the Date::Manip::Migration5to6 document for a list of changes which may be necessary.
OBJECT-ORIENTED INTERFACE
As of 6.00, Date::Manip consists of a set of OO modules. Each have their own document (see
the "SEE ALSO" in Date::Manip section).
The OO interface consists of the following modules: Date::Manip::Date, Date::Manip::Delta,
Date::Manip::Recur, Date::Manip::TZ, and Date::Manip::Base.
The object-oriented interface is the only way to get the full functionality of
Date::Manip. It fully support time zones (and daylight saving time).
SELECTING AN INTERFACE
If you are running an older version of perl, the version 5 functional interface is the
only one available to you, and it will automatically be used.
If you are running a newer version of perl (5.10 or higher), you can use the object-
oriented modules by loading them directly, or you can use a functional interface.
If you use a functional interface, it will default to the version 6 interface, but you can
choose to run the version 5 interface in one of three ways:
Using the OO interface
By including any of the following:
use Date::Manip::Date;
use Date::Manip::Delta;
use Date::Manip::Recur;
use Date::Manip::TZ;
use Date::Manip::Base;
you have access to the OO interface for the appropriate types of objects.
Use the default functional interface
By including:
use Date::Manip;
in your script, one of the functional interfaces will be loaded. If you are running a
version of perl older than 5.10, it will automatically be the version 5 interface. If
you are running a newer version of perl, it will automatically load the version 6
interface.
DATE_MANIP environment variable
By setting the DATE_MANIP environment variable to 'DM5' before running the perl
script, the version 5 interface will be used.
Date::Manip::Backend variable
Alternately, you can set the Date::Manip::Backend variable to be 'DM5' before loading
the module. Typically, this will be done in the following way:
BEGIN {
$Date::Manip::Backend = 'DM5';
}
use Date::Manip;
Once a functional interface is loaded, you cannot switch between the version 5 and version
6 interfaces.
SEE ALSO
Date::Manip - main module documentation
LICENSE
This script is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
AUTHOR
Sullivan Beck (sbeck AT cpan.org)
perl v5.32.1 2021-11-20 Date::Manip::Interfaces(3pm)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-13 02:49 @18.119.140.103 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)