On Apache
Under GNU General Public License
2024-12-12 19:31 @18.224.30.6 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
Layout::PatternLayout(3pm) User Contributed Perl Documentation Layout::PatternLayout(3pm)
NAME
Log::Log4perl::Layout::PatternLayout - Pattern Layout
SYNOPSIS
use Log::Log4perl::Layout::PatternLayout;
my $layout = Log::Log4perl::Layout::PatternLayout->new(
"%d (%F:%L)> %m");
DESCRIPTION
Creates a pattern layout according to
http://jakarta.apache.org/log4j/docs/api/org/apache/log4j/PatternLayout.html and a couple
of Log::Log4perl-specific extensions.
The "new()" method creates a new PatternLayout, specifying its log format. The format
string can contain a number of placeholders which will be replaced by the logging engine
when it's time to log the message:
%c Category of the logging event.
%C Fully qualified package (or class) name of the caller
%d Current date in yyyy/MM/dd hh:mm:ss format
%d{...} Current date in customized format (see below)
%F File where the logging event occurred
%H Hostname (if Sys::Hostname is available)
%l Fully qualified name of the calling method followed by the
callers source the file name and line number between
parentheses.
%L Line number within the file where the log statement was issued
%m The message to be logged
%m{chomp} Log message, stripped off a trailing newline
%m{indent} Log message, multi-lines indented so they line up with first
%m{indent=n} Log message, multi-lines indented by n spaces
%M Method or function where the logging request was issued
%n Newline (OS-independent)
%p Priority/level of the logging event (%p{1} shows the first letter)
%P pid of the current process
%r Number of milliseconds elapsed from program start to logging
event
%R Number of milliseconds elapsed from last logging event to
current logging event
%T A stack trace of functions called
%x The topmost NDC (see below)
%X{key} The entry 'key' of the MDC (see below)
%% A literal percent (%) sign
NDC and MDC are explained in "Nested Diagnostic Context (NDC)" in Log::Log4perl and
"Mapped Diagnostic Context (MDC)" in Log::Log4perl.
The granularity of time values is milliseconds if Time::HiRes is available. If not, only
full seconds are used.
Every once in a while, someone uses the "%m%n" pattern and additionally provides an extra
newline in the log message (e.g. "->log("message\n")". To avoid printing an extra newline
in this case, the PatternLayout will chomp the message, printing only one newline. This
option can be controlled by PatternLayout's "message_chomp_before_newline" option. See
"Advanced options" for details.
Quantify placeholders
All placeholders can be extended with formatting instructions, just like in printf:
%20c Reserve 20 chars for the category, right-justify and fill
with blanks if it is shorter
%-20c Same as %20c, but left-justify and fill the right side
with blanks
%09r Zero-pad the number of milliseconds to 9 digits
%.8c Specify the maximum field with and have the formatter
cut off the rest of the value
Fine-tuning with curlies
Some placeholders have special functions defined if you add curlies with content after
them:
%c{1} Just show the right-most category component, useful in large
class hierarchies (Foo::Baz::Bar -> Bar)
%c{2} Just show the two right most category components
(Foo::Baz::Bar -> Baz::Bar)
%F Display source file including full path
%F{1} Just display filename
%F{2} Display filename and last path component (dir/test.log)
%F{3} Display filename and last two path components (d1/d2/test.log)
%M Display fully qualified method/function name
%M{1} Just display method name (foo)
%M{2} Display method name and last path component (main::foo)
In this way, you're able to shrink the displayed category or limit file/path components to
save space in your logs.
Fine-tune the date
If you're not happy with the default %d format for the date which looks like
yyyy/MM/DD HH:mm:ss
(which is slightly different from Log4j which uses "yyyy-MM-dd HH:mm:ss,SSS") you're free
to fine-tune it in order to display only certain characteristics of a date, according to
the SimpleDateFormat in the Java World
(http://docs.oracle.com/javase/8/docs/api/java/text/SimpleDateFormat.html):
%d{HH:mm} "23:45" -- Just display hours and minutes
%d{yy, EEEE} "02, Monday" -- Just display two-digit year
and spelled-out weekday
%d{e} "1473741760" -- Epoch seconds
%d{h a} "12 PM" -- Hour and am/pm marker
... and many more
For an exhaustive list of all supported date features, look at Log::Log4perl::DateFormat.
Custom cspecs
First of all, "cspecs" is short for "conversion specifiers", which is the log4j and the
printf(3) term for what Mike is calling "placeholders." I suggested "cspecs" for this
part of the api before I saw that Mike was using "placeholders" consistently in the
log4perl documentation. Ah, the joys of collaboration ;=) --kg
If the existing corpus of placeholders/cspecs isn't good enough for you, you can easily
roll your own:
#'U' a global user-defined cspec
log4j.PatternLayout.cspec.U = sub { return "UID: $< "}
#'K' cspec local to appndr1 (pid in hex)
log4j.appender.appndr1.layout.cspec.K = sub { return sprintf "%1x", $$}
#and now you can use them
log4j.appender.appndr1.layout.ConversionPattern = %K %U %m%n
The benefit of this approach is that you can define and use the cspecs right next to each
other in the config file.
If you're an API kind of person, there's also this call:
Log::Log4perl::Layout::PatternLayout::
add_global_cspec('Z', sub {'zzzzzzzz'}); #snooze?
When the log message is being put together, your anonymous sub will be called with these
arguments:
($layout, $message, $category, $priority, $caller_level);
layout: the PatternLayout object that called it
message: the logging message (%m)
category: e.g. groceries.beverages.adult.beer.schlitz
priority: e.g. DEBUG|WARN|INFO|ERROR|FATAL
caller_level: how many levels back up the call stack you have
to go to find the caller
Please note that the subroutines you're defining in this way are going to be run in the
"main" namespace, so be sure to fully qualify functions and variables if they're located
in different packages. Also make sure these subroutines aren't using Log4perl, otherwise
Log4perl will enter an infinite recursion.
With Log4perl 1.20 and better, cspecs can be written with parameters in curly braces.
Writing something like
log4perl.appender.Screen.layout.ConversionPattern = %U{user} %U{id} %m%n
will cause the cspec function defined for %U to be called twice, once with the parameter
'user' and then again with the parameter 'id', and the placeholders in the cspec string
will be replaced with the respective return values.
The parameter value is available in the 'curlies' entry of the first parameter passed to
the subroutine (the layout object reference). So, if you wanted to map %U{xxx} to entries
in the POE session hash, you'd write something like:
log4perl.PatternLayout.cspec.U = sub { \
POE::Kernel->get_active_session->get_heap()->{ $_[0]->{curlies} } }
SECURITY NOTE
This feature means arbitrary perl code can be embedded in the config file. In the rare
case where the people who have access to your config file are different from the people
who write your code and shouldn't have execute rights, you might want to set
$Log::Log4perl::Config->allow_code(0);
before you call init(). Alternatively you can supply a restricted set of Perl opcodes
that can be embedded in the config file as described in "Restricting what Opcodes can be
in a Perl Hook" in Log::Log4perl.
Advanced Options
The constructor of the "Log::Log4perl::Layout::PatternLayout" class takes an optional hash
reference as a first argument to specify additional options in order to (ab)use it in
creative ways:
my $layout = Log::Log4perl::Layout::PatternLayout->new(
{ time_function => \&my_time_func,
},
"%d (%F:%L)> %m");
Here's a list of parameters:
time_function
Takes a reference to a function returning the time for the time/date fields, either in
seconds since the epoch or as an array, carrying seconds and microseconds, just like
"Time::HiRes::gettimeofday" does.
message_chomp_before_newline
If a layout contains the pattern "%m%n" and the message ends with a newline,
PatternLayout will chomp the message, to prevent printing two newlines. If this is
not desired, and you want two newlines in this case, the feature can be turned off by
setting the "message_chomp_before_newline" option to a false value:
my $layout = Log::Log4perl::Layout::PatternLayout->new(
{ message_chomp_before_newline => 0
},
"%d (%F:%L)> %m%n");
In a Log4perl configuration file, the feature can be turned off like this:
log4perl.appender.App.layout = PatternLayout
log4perl.appender.App.layout.ConversionPattern = %d %m%n
# Yes, I want two newlines
log4perl.appender.App.layout.message_chomp_before_newline = 0
Getting rid of newlines
If your code contains logging statements like
# WRONG, don't do that!
$logger->debug("Some message\n");
then it's usually best to strip the newlines from these calls. As explained in "Logging
newlines" in Log::Log4perl, logging statements should never contain newlines, but rely on
appender layouts to add necessary newlines instead.
If changing the code is not an option, use the special PatternLayout placeholder %m{chomp}
to refer to the message excluding a trailing newline:
log4perl.appender.App.layout.ConversionPattern = %d %m{chomp}%n
This will add a single newline to every message, regardless if it complies with the
Log4perl newline guidelines or not (thanks to Tim Bunce for this idea).
Multi Lines
If a log message consists of several lines, like
$logger->debug("line1\nline2\nline3");
then by default, they get logged like this (assuming the the layout is set to "%d>%m%n"):
# layout %d>%m%n
2014/07/27 12:46:16>line1
line2
line3
If you'd rather have the messages aligned like
# layout %d>%m{indent}%n
2014/07/27 12:46:16>line1
line2
line3
then use the %m{indent} option for the %m specifier. This option can also take a fixed
value, as in %m{indent=2}, which indents subsequent lines by two spaces:
# layout %d>%m{indent=2}%n
2014/07/27 12:46:16>line1
line2
line3
Note that you can still add the "chomp" option for the %m specifier in this case (see
above what it does), simply add it after a separating comma, like in %m{indent=2,chomp}.
LICENSE
Copyright 2002-2013 by Mike Schilli <m AT perlmeister.com> and Kevin Goess <cpan AT goess.org>.
This library is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
AUTHOR
Please contribute patches to the project on Github:
http://github.com/mschilli/log4perl
Send bug reports or requests for enhancements to the authors via our
MAILING LIST (questions, bug reports, suggestions/patches):
log4perl-devel AT lists.net
Authors (please contact them via the list above, not directly): Mike Schilli
<m AT perlmeister.com>, Kevin Goess <cpan AT goess.org>
Contributors (in alphabetical order): Ateeq Altaf, Cory Bennett, Jens Berthold, Jeremy
Bopp, Hutton Davidson, Chris R. Donnelly, Matisse Enzer, Hugh Esco, Anthony Foiani, James
FitzGibbon, Carl Franks, Dennis Gregorovic, Andy Grundman, Paul Harrington, Alexander
Hartmaier David Hull, Robert Jacobson, Jason Kohles, Jeff Macdonald, Markus Peter, Brett
Rann, Peter Rabbitson, Erik Selberg, Aaron Straup Cope, Lars Thegler, David Viner, Mac
Yang.
perl v5.32.1 2021-02-14 Layout::PatternLayout(3pm)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-12 19:31 @18.224.30.6 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)