On Apache
Under GNU General Public License
2024-12-12 19:30 @18.118.142.126 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
PARTX(8) System Administration PARTX(8)
NAME
partx - tell the kernel about the presence and numbering of on-disk partitions
SYNOPSIS
partx [-a|-d|-P|-r|-s|-u] [-t type] [-n M:_N_] [-] disk
partx [-a|-d|-P|-r|-s|-u] [-t type] partition [disk]
DESCRIPTION
Given a device or disk-image, partx tries to parse the partition table and list its
contents. It can also tell the kernel to add or remove partitions from its bookkeeping.
The disk argument is optional when a partition argument is provided. To force scanning a
partition as if it were a whole disk (for example to list nested subpartitions), use the
argument "-" (hyphen-minus). For example:
partx --show - /dev/sda3
This will see sda3 as a whole-disk rather than as a partition.
partx is not an fdisk program - adding and removing partitions does not change the disk,
it just tells the kernel about the presence and numbering of on-disk partitions.
OPTIONS
-a, --add
Add the specified partitions, or read the disk and add all partitions.
-b, --bytes
Print the SIZE column in bytes rather than in human-readable format.
-d, --delete
Delete the specified partitions or all partitions. It is not error to remove
non-existing partitions, so this option is possible to use together with large --nr
ranges without care about the current partitions set on the device.
-g, --noheadings
Do not print a header line with --show or --raw.
-l, --list
List the partitions. Note that all numbers are in 512-byte sectors. This output format
is DEPRECATED in favour of --show. Do not use it in newly written scripts.
-n, --nr M:N
Specify the range of partitions. For backward compatibility also the format M-N is
supported. The range may contain negative numbers, for example --nr -1:-1 means the
last partition, and --nr -2:-1 means the last two partitions. Supported range
specifications are:
M
Specifies just one partition (e.g. --nr 3).
M:
Specifies the lower limit only (e.g. --nr 2:).
:N
Specifies the upper limit only (e.g. --nr :4).
M:N
Specifies the lower and upper limits (e.g. --nr 2:4).
-o, --output list
Define the output columns to use for --show, --pairs and --raw output. If no output
arrangement is specified, then a default set is used. Use --help to get list of all
supported columns. This option cannot be combined with the --add, --delete, --update
or --list options.
--output-all
Output all available columns.
-P, --pairs
List the partitions using the KEY="value" format.
-r, --raw
List the partitions using the raw output format.
-s, --show
List the partitions. The output columns can be selected and rearranged with the
--output option. All numbers (except SIZE) are in 512-byte sectors.
-t, --type type
Specify the partition table type.
--list-types
List supported partition types and exit.
-u, --update
Update the specified partitions.
-S, --sector-size size
Overwrite default sector size.
-v, --verbose
Verbose mode.
-V, --version
Display version information and exit.
-h, --help
Display help text and exit.
ENVIRONMENT
LIBBLKID_DEBUG=all
enables libblkid debug output.
EXAMPLE
partx --show /dev/sdb3, partx --show --nr 3 /dev/sdb, partx --show /dev/sdb3 /dev/sdb
All three commands list partition 3 of /dev/sdb.
partx --show - /dev/sdb3
Lists all subpartitions on /dev/sdb3 (the device is used as whole-disk).
partx -o START -g --nr 5 /dev/sdb
Prints the start sector of partition 5 on /dev/sdb without header.
partx -o SECTORS,SIZE /dev/sda5 /dev/sda
Lists the length in sectors and human-readable size of partition 5 on /dev/sda.
partx --add --nr 3:5 /dev/sdd
Adds all available partitions from 3 to 5 (inclusive) on /dev/sdd.
partx -d --nr :-1 /dev/sdd
Removes the last partition on /dev/sdd.
AUTHORS
Davidlohr Bueso <dave AT gnu.org>, Karel Zak <kzak AT redhat.com>
The original version was written by Andries E. Brouwer <aeb AT cwi.nl>
SEE ALSO
addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)
REPORTING BUGS
For bug reports, use the issue tracker at https://github.com/karelzak/util-linux/issues.
AVAILABILITY
The partx command is part of the util-linux package which can be downloaded from Linux
Kernel Archive <https://www.kernel.org/pub/linux/utils/util-linux/>.
util-linux 2.37.2 2021-06-02 PARTX(8)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-12 19:30 @18.118.142.126 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)