On Apache
Under GNU General Public License
2024-12-12 19:34 @3.137.165.119 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
Config(3pm) User Contributed Perl Documentation Config(3pm)
NAME
Log::Log4perl::Config - Log4perl configuration file syntax
DESCRIPTION
In "Log::Log4perl", configuration files are used to describe how the system's loggers
ought to behave.
The format is the same as the one as used for "log4j", just with a few perl-specific
extensions, like enabling the "Bar::Twix" syntax instead of insisting on the Java-specific
"Bar.Twix".
Comment lines and blank lines (all whitespace or empty) are ignored.
Comment lines may start with arbitrary whitespace followed by one of:
# - Common comment delimiter
! - Java .properties file comment delimiter accepted by log4j
; - Common .ini file comment delimiter
Comments at the end of a line are not supported. So if you write
log4perl.appender.A1.filename=error.log #in current dir
you will find your messages in a file called "error.log #in current dir".
Also, blanks between syntactical entities are ignored, it doesn't matter if you write
log4perl.logger.Bar.Twix=WARN,Screen
or
log4perl.logger.Bar.Twix = WARN, Screen
"Log::Log4perl" will strip the blanks while parsing your input.
Assignments need to be on a single line. However, you can break the line if you want to by
using a continuation character at the end of the line. Instead of writing
log4perl.appender.A1.layout=Log::Log4perl::Layout::SimpleLayout
you can break the line at any point by putting a backslash at the very (!) end of the
line to be continued:
log4perl.appender.A1.layout=\
Log::Log4perl::Layout::SimpleLayout
Watch out for trailing blanks after the backslash, which would prevent the line from being
properly concatenated.
Loggers
Loggers are addressed by category:
log4perl.logger.Bar.Twix = WARN, Screen
This sets all loggers under the "Bar::Twix" hierarchy on priority "WARN" and attaches a
later-to-be-defined "Screen" appender to them. Settings for the root appender (which
doesn't have a name) can be accomplished by simply omitting the name:
log4perl.logger = FATAL, Database, Mailer
This sets the root appender's level to "FATAL" and also attaches the later-to-be-defined
appenders "Database" and "Mailer" to it. Alternatively, the root logger can be addressed
as "rootLogger":
log4perl.rootLogger = FATAL, Database, Mailer
The additivity flag of a logger is set or cleared via the "additivity" keyword:
log4perl.additivity.Bar.Twix = 0|1
(Note the reversed order of keyword and logger name, resulting from the dilemma that a
logger name could end in ".additivity" according to the log4j documentation).
Appenders and Layouts
Appender names used in Log4perl configuration file lines need to be resolved later on, in
order to define the appender's properties and its layout. To specify properties of an
appender, just use the "appender" keyword after the "log4perl" intro and the appender's
name:
# The Bar::Twix logger and its appender
log4perl.logger.Bar.Twix = DEBUG, A1
log4perl.appender.A1=Log::Log4perl::Appender::File
log4perl.appender.A1.filename=test.log
log4perl.appender.A1.mode=append
log4perl.appender.A1.layout=Log::Log4perl::Layout::SimpleLayout
This sets a priority of "DEBUG" for loggers in the "Bar::Twix" hierarchy and assigns the
"A1" appender to it, which is later on resolved to be an appender of type
"Log::Log4perl::Appender::File", simply appending to a log file. According to the
"Log::Log4perl::Appender::File" manpage, the "filename" parameter specifies the name of
the log file and the "mode" parameter can be set to "append" or "write" (the former will
append to the logfile if one with the specified name already exists while the latter would
clobber and overwrite it).
The order of the entries in the configuration file is not important, "Log::Log4perl" will
read in the entire file first and try to make sense of the lines after it knows the entire
context.
You can very well define all loggers first and then their appenders (you could even define
your appenders first and then your loggers, but let's not go there):
log4perl.logger.Bar.Twix = DEBUG, A1
log4perl.logger.Bar.Snickers = FATAL, A2
log4perl.appender.A1=Log::Log4perl::Appender::File
log4perl.appender.A1.filename=test.log
log4perl.appender.A1.mode=append
log4perl.appender.A1.layout=Log::Log4perl::Layout::SimpleLayout
log4perl.appender.A2=Log::Log4perl::Appender::Screen
log4perl.appender.A2.stderr=0
log4perl.appender.A2.layout=Log::Log4perl::Layout::PatternLayout
log4perl.appender.A2.layout.ConversionPattern = %d %m %n
Note that you have to specify the full path to the layout class and that
"ConversionPattern" is the keyword to specify the printf-style formatting instructions.
Configuration File Cookbook
Here's some examples of often-used Log4perl configuration files:
Append to STDERR
log4perl.category.Bar.Twix = WARN, Screen
log4perl.appender.Screen = Log::Log4perl::Appender::Screen
log4perl.appender.Screen.layout = \
Log::Log4perl::Layout::PatternLayout
log4perl.appender.Screen.layout.ConversionPattern = %d %m %n
Append to STDOUT
log4perl.category.Bar.Twix = WARN, Screen
log4perl.appender.Screen = Log::Log4perl::Appender::Screen
log4perl.appender.Screen.stderr = 0
log4perl.appender.Screen.layout = \
Log::Log4perl::Layout::PatternLayout
log4perl.appender.Screen.layout.ConversionPattern = %d %m %n
Append to a log file
log4perl.logger.Bar.Twix = DEBUG, A1
log4perl.appender.A1=Log::Log4perl::Appender::File
log4perl.appender.A1.filename=test.log
log4perl.appender.A1.mode=append
log4perl.appender.A1.layout = \
Log::Log4perl::Layout::PatternLayout
log4perl.appender.A1.layout.ConversionPattern = %d %m %n
Note that you could even leave out
log4perl.appender.A1.mode=append
and still have the logger append to the logfile by default, although the
"Log::Log4perl::Appender::File" module does exactly the opposite. This is due to some
nasty trickery "Log::Log4perl" performs behind the scenes to make sure that beginner's CGI
applications don't clobber the log file every time they're called.
Write a log file from scratch
If you loathe the Log::Log4perl's append-by-default strategy, you can certainly override
it:
log4perl.logger.Bar.Twix = DEBUG, A1
log4perl.appender.A1=Log::Log4perl::Appender::File
log4perl.appender.A1.filename=test.log
log4perl.appender.A1.mode=write
log4perl.appender.A1.layout=Log::Log4perl::Layout::SimpleLayout
"write" is the "mode" that has "Log::Log4perl::Appender::File" explicitly clobber the log
file if it exists.
Configuration files encoded in utf-8
If your configuration file is encoded in utf-8 (which matters if you e.g. specify
utf8-encoded appender filenames in it), then you need to tell Log4perl before running
init():
use Log::Log4perl::Config;
Log::Log4perl::Config->utf( 1 );
Log::Log4perl->init( ... );
This makes sure Log4perl interprets utf8-encoded config files correctly. This setting
might become the default at some point.
SEE ALSO
Log::Log4perl::Config::PropertyConfigurator
Log::Log4perl::Config::DOMConfigurator
Log::Log4perl::Config::LDAPConfigurator (coming soon!)
LICENSE
Copyright 2002-2013 by Mike Schilli <m AT perlmeister.com> and Kevin Goess <cpan AT goess.org>.
This library is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
AUTHOR
Please contribute patches to the project on Github:
http://github.com/mschilli/log4perl
Send bug reports or requests for enhancements to the authors via our
MAILING LIST (questions, bug reports, suggestions/patches):
log4perl-devel AT lists.net
Authors (please contact them via the list above, not directly): Mike Schilli
<m AT perlmeister.com>, Kevin Goess <cpan AT goess.org>
Contributors (in alphabetical order): Ateeq Altaf, Cory Bennett, Jens Berthold, Jeremy
Bopp, Hutton Davidson, Chris R. Donnelly, Matisse Enzer, Hugh Esco, Anthony Foiani, James
FitzGibbon, Carl Franks, Dennis Gregorovic, Andy Grundman, Paul Harrington, Alexander
Hartmaier David Hull, Robert Jacobson, Jason Kohles, Jeff Macdonald, Markus Peter, Brett
Rann, Peter Rabbitson, Erik Selberg, Aaron Straup Cope, Lars Thegler, David Viner, Mac
Yang.
perl v5.32.1 2021-02-14 Config(3pm)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-12 19:34 @3.137.165.119 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)