On Apache
Under GNU General Public License
2024-12-26 05:36 @3.21.44.115 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
PVMOVE(8) System Manager's Manual PVMOVE(8)
NAME
pvmove - Move extents from one physical volume to another
SYNOPSIS
pvmove position_args
[ option_args ]
[ position_args ]
DESCRIPTION
pvmove moves the allocated physical extents (PEs) on a source PV to one or more destina-
tion PVs. You can optionally specify a source LV in which case only extents used by that
LV will be moved to free (or specified) extents on the destination PV. If no destination
PV is specified, the normal allocation rules for the VG are used.
If pvmove is interrupted for any reason (e.g. the machine crashes) then run pvmove again
without any PV arguments to restart any operations that were in progress from the last
checkpoint. Alternatively, use the abort option at any time to abort the operation. The
resulting location of LVs after an abort depends on whether the atomic option was used.
More than one pvmove can run concurrently if they are moving data from different source
PVs, but additional pvmoves will ignore any LVs already in the process of being changed,
so some data might not get moved.
USAGE
Move PV extents.
pvmove PV
[ -A|--autobackup y|n ]
[ -n|--name LV ]
[ --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit ]
[ --atomic ]
[ --noudevsync ]
[ --reportformat basic|json ]
[ COMMON_OPTIONS ]
[ PV ... ]
Continue or abort existing pvmove operations.
pvmove
[ COMMON_OPTIONS ]
Common options for command:
[ -b|--background ]
[ -i|--interval Number ]
[ --abort ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --driverloaded y|n ]
[ --lockopt String ]
[ --longhelp ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
--abort
Abort any pvmove operations in progress. If a pvmove was started with the --atomic
option, then all LVs will remain on the source PV. Otherwise, segments that have
been moved will remain on the destination PV, while unmoved segments will remain on
the source PV.
--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
Determines the allocation policy when a command needs to allocate Physical Extents
(PEs) from the VG. Each VG and LV has an allocation policy which can be changed
with vgchange/lvchange, or overriden on the command line. normal applies common
sense rules such as not placing parallel stripes on the same PV. inherit applies
the VG policy to an LV. contiguous requires new PEs be placed adjacent to existing
PEs. cling places new PEs on the same PV as existing PEs in the same stripe of the
LV. If there are sufficient PEs for an allocation, but normal does not use them,
anywhere will use them even if it reduces performance, e.g. by placing two stripes
on the same PV. Optional positional PV args on the command line can also be used
to limit which PVs the command will use for allocation. See lvm(8) for more infor-
mation about allocation.
--atomic
Makes a pvmove operation atomic, ensuring that all affected LVs are moved to the
destination PV, or none are if the operation is aborted.
-A|--autobackup y|n
Specifies if metadata should be backed up automatically after a change. Enabling
this is strongly advised! See vgcfgbackup(8) for more information.
-b|--background
If the operation requires polling, this option causes the command to return before
the operation is complete, and polling is done in the background.
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5) for more in-
formation about profiles.
--config String
Config settings for the command. These override lvm.conf settings. The String arg
uses the same format as lvm.conf, or may use section/field syntax. See lvm.conf(5)
for more information about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent
to the log file and/or syslog (if configured).
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing and
debugging.
-h|--help
Display help text.
-i|--interval Number
Report progress at regular intervals.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more in-
formation.
--longhelp
Display long help text.
-n|--name String
Move only the extents belonging to the named LV.
--nolocking
Disable locking.
--noudevsync
Disables udev synchronisation. The process will not wait for notification from
udev. It will continue irrespective of any possible udev processing in the back-
ground. Only use this if udev is not running or has rules that ignore the devices
LVM creates.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once to
also suppress any prompts with answer 'no'.
--reportformat basic|json
Overrides current output format for reports which is defined globally by the re-
port/output_format setting in lvm.conf. basic is the original format with columns
and rows. If there is more than one report per command, each report is prefixed
with the report name for identification. json produces report output in JSON for-
mat. See lvmreport(7) for more information.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by dis-
abling all metadata writing but nevertheless returning success to the calling func-
tion. This may lead to unusual error messages in multi-stage operations if a tool
relies on reading back metadata it believes has changed but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes. Use
with extreme caution. (For automatic no, see -qq.)
VARIABLES
PV
Physical Volume name, a device path under /dev. For commands managing physical ex-
tents, a PV positional arg generally accepts a suffix indicating a range (or multi-
ple ranges) of physical extents (PEs). When the first PE is omitted, it defaults to
the start of the device, and when the last PE is omitted it defaults to end. Start
and end range (inclusive): PV[:PE-PE]... Start and length range (counting from 0):
PV[:PE+PE]...
String
See the option description for information about the string content.
Size[UNIT]
Size is an input number that accepts an optional unit. Input units are always
treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both re-
fer to 1024. The default input unit is specified by letter, followed by |UNIT.
UNIT represents other possible input units: bBsSkKmMgGtTpPeE. b|B is bytes, s|S is
sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB,
e|E is EiB. (This should not be confused with the output control --units, where
capital letters mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm. For example,
LVM_VG_NAME can generally be substituted for a required VG parameter.
NOTES
pvmove works as follows:
1. A temporary 'pvmove' LV is created to store details of all the data movements required.
2. Every LV in the VG is searched for contiguous data that need moving according to the
command line arguments. For each piece of data found, a new segment is added to the end
of the pvmove LV. This segment takes the form of a temporary mirror to copy the data from
the original location to a newly allocated location. The original LV is updated to use
the new temporary mirror segment in the pvmove LV instead of accessing the data directly.
3. The VG metadata is updated on disk.
4. The first segment of the pvmove LV is activated and starts to mirror the first part of
the data. Only one segment is mirrored at once as this is usually more efficient.
5. A daemon repeatedly checks progress at the specified time interval. When it detects
that the first temporary mirror is in sync, it breaks that mirror so that only the new lo-
cation for that data gets used and writes a checkpoint into the VG metadata on disk. Then
it activates the mirror for the next segment of the pvmove LV.
6. When there are no more segments left to be mirrored, the temporary LV is removed and
the VG metadata is updated so that the LVs reflect the new data locations.
Note that this new process cannot support the original LVM1 type of on-disk metadata.
Metadata can be converted using vgconvert(8).
If the --atomic option is used, a slightly different approach is used for the move.
Again, a temporary 'pvmove' LV is created to store the details of all the data movements
required. This temporary LV contains all the segments of the various LVs that need to be
moved. However, in this case, an identical LV is allocated that contains the same number
of segments and a mirror is created to copy the contents from the first temporary LV to
the second. After a complete copy is made, the temporary LVs are removed, leaving behind
the segments on the destination PV. If an abort is issued during the move, all LVs being
moved will remain on the source PV.
EXAMPLES
Move all physical extents that are used by simple LVs on the specified PV to free physical
extents elsewhere in the VG.
pvmove /dev/sdb1
Use a specific destination PV when moving physical extents.
pvmove /dev/sdb1 /dev/sdc1
Move extents belonging to a single LV.
pvmove -n lvol1 /dev/sdb1 /dev/sdc1
Rather than moving the contents of an entire device, it is possible to move a range of
physical extents, for example numbers 1000 to 1999 inclusive on the specified PV.
pvmove /dev/sdb1:1000-1999
A range of physical extents to move can be specified as start+length. For example, start-
ing from PE 1000. (Counting starts from 0, so this refers to the 1001st to the 2000th PE
inclusive.)
pvmove /dev/sdb1:1000+1000
Move a range of physical extents to a specific PV (which must have sufficient free ex-
tents).
pvmove /dev/sdb1:1000-1999 /dev/sdc1
Move a range of physical extents to specific new extents on a new PV.
pvmove /dev/sdb1:1000-1999 /dev/sdc1:0-999
If the source and destination are on the same disk, the anywhere allocation policy is
needed.
pvmove --alloc anywhere /dev/sdb1:1000-1999 /dev/sdb1:0-999
The part of a specific LV present within in a range of physical extents can also be picked
out and moved.
pvmove -n lvol1 /dev/sdb1:1000-1999 /dev/sdc1
SEE ALSO
lvm(8) lvm.conf(5) lvmconfig(8)
pvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8) pvresize(8) pvs(8) pvs-
can(8)
vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8)
vgexport(8) vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8)
vgremove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)
lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8) lvreduce(8) lvremove(8)
lvrename(8) lvresize(8) lvs(8) lvscan(8)
lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)
dmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8)
lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)
Red Hat, Inc. LVM TOOLS 2.03.11(2) (2021-01-08) PVMOVE(8)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-26 05:36 @3.21.44.115 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)